WHERE is this Camshaft Position Sensor on my Bluetec??
#1
Newbie
Thread Starter
Join Date: Jan 2020
Location: Ft. Hood, TX
Posts: 4
Received 0 Likes
on
0 Posts
2012 W212 MB E350 BlueTEC (6 Cylinders 3.0L Turbo Dsl DOHC 182 CID)
WHERE is this Camshaft Position Sensor on my Bluetec??
Hi all. Can someone perhaps help this old lady? Nothing on youtube shows this specific engine and I can't make heads or tails out of line art drawings with a gazillion parts. I have all Mercedes tools and have replaced a few parts myself, but I first need to know WHERE it is. I get a P0341 Camshaft Position Sensor 'A' Circuit Range/ Performance Bank 1 or Single Sensor error code. My battery tests fine.
I even found the Bosch part at AutoZone ... I just need to know where the sucker is located. Can you draw me a picture?? Please?? I included a picture of my engine without splash cover (which the local Euro shop lost but isn't fessing up to it.)
Thank you in advance for any pointers / advice you can give me.
I even found the Bosch part at AutoZone ... I just need to know where the sucker is located. Can you draw me a picture?? Please?? I included a picture of my engine without splash cover (which the local Euro shop lost but isn't fessing up to it.)
Thank you in advance for any pointers / advice you can give me.
#2
MBWorld Fanatic!
I dont have that car or engine but i searched around. i think its on the passenger side of the engine behind the oil fill.
Last edited by TimC300; 05-19-2024 at 09:34 PM.
The following users liked this post:
BethArneyMB2012 (05-19-2024)
#3
MBWorld Fanatic!
I came across this thread that looks helpful: https://mbworld.org/forums/m-class-w164/622352-w164-om642-diesel-camshaft-cmk-position-sensor-replacement-diy.html
Youtube Video:
Youtube Video:
Last edited by TimC300; 05-19-2024 at 09:46 PM.
#6
Newbie
Thread Starter
Join Date: Jan 2020
Location: Ft. Hood, TX
Posts: 4
Received 0 Likes
on
0 Posts
2012 W212 MB E350 BlueTEC (6 Cylinders 3.0L Turbo Dsl DOHC 182 CID)
THAT'S IT!!! OMG, Thank you. I knew I needed someone to draw me a picture. I really appreciate this! I looked at it in my engine and I can work with that. THANK YOU!
#7
Newbie
Thread Starter
Join Date: Jan 2020
Location: Ft. Hood, TX
Posts: 4
Received 0 Likes
on
0 Posts
2012 W212 MB E350 BlueTEC (6 Cylinders 3.0L Turbo Dsl DOHC 182 CID)
Trending Topics
#8
MBWorld Fanatic!
Join Date: May 2018
Location: Jakarta-Indonesia
Posts: 4,054
Received 4,120 Likes
on
2,418 Posts
2014 - W212 - E400 ( M276.820, 3 liter Turbo) RWD not Hybrid