SL/R230: Keyless Go card program question
Thread Starter
MBWorld Fanatic!
Joined: Sep 2006
Posts: 1,921
Likes: 173
From: Long Island New York
2003 SL55,2020 GTC ,2017 GTS sold ,2002 G500 Sold,2003 SL500 Sold,
Keyless Go card program question
I lost one of my keyless go cards,03 SL 500 my friend has same car doesnt use his,can the dealer re program his card to work on my car ?
Member
Joined: Nov 2005
Posts: 106
Likes: 0
From: Athens, GREECE
2003 SL500, 2001 Jeep Grand Cherokee Limited
Do you know how this is done? Is it a DIY job?
(Vaguely remember that the button on the card should be pressed / the card should be left inside the car for few hours / the key inserted in the ignition / position 2, etc/etc....)
(Vaguely remember that the button on the card should be pressed / the card should be left inside the car for few hours / the key inserted in the ignition / position 2, etc/etc....)
Super Member
Joined: Aug 2006
Posts: 545
Likes: 1
It has been done by numerous amount of people and so far there hasnt been one that has succeed in the reprograming by themselfs. I would just take it to the dealer I dont believe they charge you for it but I could be wrong.
Junior Member
Joined: Apr 2007
Posts: 17
Likes: 1
Bad news I fear...
I asked my dealer the same question because I have the same issues... and unless you buy a new card from them ($395 plus 1 hours labor for reprogramming) you are scr*wed...
That's what my dealer tells me anyway...
Geoff
floridabrits
That's what my dealer tells me anyway...
Geoff
floridabrits
Super Member
Joined: Aug 2006
Posts: 545
Likes: 1
Tell that dealer to shove it up there @ss and dont bother doing business with them anymore. Dealers here are willing to do it just depends on how money hungry they are. I have a few inside connections and they say its a no brainer job to do. Try another dealer if possible
Trending Topics
Thread Starter
MBWorld Fanatic!
Joined: Sep 2006
Posts: 1,921
Likes: 173
From: Long Island New York
2003 SL55,2020 GTC ,2017 GTS sold ,2002 G500 Sold,2003 SL500 Sold,
keyless go
my dealer says that they cant do it,you need a new card ? but then why do they have to program it,they say I have to order a new card at $193.00 my cost plus 1/2 hour labor to program it ? if they order to my car with the vin they shouldnt need to program it,im sure you can use a used card ,they just dont want to do it , if anyone has access to WIS the procedure for reassigning a replacement card is WIS:GF80.61-P-4103R so there you have it,I guess you can reassign ,I just dont know that procedure,i found this info today on the net
