SL/R230: Installed New Daytime Running LED.. Problem?
#1
Installed New Daytime Running LED.. Problem?
I recently bought some daytime running LED lights for an 2003 SL500 following fellow forum member's advice of http://store.ijdmtoy.com/Canbus-Euro..._t10_sku26.htm
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?
#2
Super Member
Join Date: May 2009
Location: In a VAN down by the river
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
His wifes head hard into the headboard nightly!!
I recently bought some daytime running LED lights for an 2003 SL500 following fellow forum member's advice of http://store.ijdmtoy.com/Canbus-Euro..._t10_sku26.htm
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?
#3
Super Member
Join Date: May 2009
Location: In a VAN down by the river
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
His wifes head hard into the headboard nightly!!
I recently bought some daytime running LED lights for an 2003 SL500 following fellow forum member's advice of http://store.ijdmtoy.com/Canbus-Euro..._t10_sku26.htm
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?
The problem is that when I install them, the voltage in the car isn't enough to power two of them.
So suppose I install A and B... A would be perfectly fine, but B would flicker.
Now if I took out A, B would then be perfectly fine...
I know some of us installed this particular bulb.. Can anybody please advise?