SL/R230: 2009 SL550 hydraulic oil leak
http://www.ebay.com/itm/01-12-Merced...lWNn-R&vxp=mtr
Tim
http://www.ebay.com/itm/01-12-Merced...lWNn-R&vxp=mtr
Tim Has anyone done a "How to" on replacing the seal?



https://www.tophydraulicsinc.com/en/21-r230-sl
The cylinder can be removed and replaced in about 2 hours time if its hydraulic lines are cut. If you are going to pay to have this repaired, I'd find a shop that is willing to proceed in that manner and who will use Top Hydraulics to rebuild the cylinder. The cut lines can be restored using "couplers" from Cabriolet Hydraulics. Cost of this repair method would be c. $500.


