SL/R230: Killer chiller mounting on SL55 AMG , Need help
09-06-2017, 04:42 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2013
Location: Europe, but from Norway
Posts: 428
Received 46 Likes
on
41 Posts
89 SL500 Silver ,97 SL500 Carlsson 04 Mercedes SL55 AMG , 07 Mercedes SL55 AMG convertedBlack series
Killer chiller mounting on SL55 AMG , Need help
about to mount the DRAG kit from killer chiller, anybody that can share some info, pictures ? maybe e mail me trader@ayeurope.com
the cooling unit mounted just right to bosh 10 pump, small adjustment to pump,
killer chiller unit mounted left of the extra intercooler. Return line for aircon gas in front .top under radiator. main line goes on top of the fan inside.
only whats left is finish the mounting piping to the cars system aircon. is not bolt on ,we need change end pipes.
Last edited by Tommyboy928; 09-07-2017 at 07:15 PM.
09-08-2017, 07:09 PM
#2
Senior Member
You are defeating the cooling done by the KC by using heat exchangers. Think about it. The heat exchangers will cool down the water to ambient temp at the coolest. The KC will cool the water below ambient so the heat exchangers will be actually operating in reverse by heating the below ambient temp water trying to get the water back to ambient temp.
The following users liked this post:
Tommyboy928 (09-11-2017)
