SL/R230: ABC visit workshop
06-02-2018, 05:33 AM
#1
Newbie
Thread Starter
ABC visit workshop
Hi I have a sl500 r230 2003 i started it up and visit workshop in grey I turned car off and on and it didn't come up again all day started it up next morning and it come up again also when I turn it off there is a hissing from front left side any info please. I did plug a reader in and no codes
06-02-2018, 06:08 AM
#2
Banned
I presume you have at least one code for this problem and used an OBD-II reader which is incapable of interrogating the ABC suspension controller to retrieve codes.
I'll guess the fault is a consequence of the ABC controller seeing inadequate system hydraulic pressure. An iCarsoft reader or Star Diagnosis can read out the pressure and confirm this diagnosis. The pump, pressure sensor, or the controller could each be faulty.
I'll guess the fault is a consequence of the ABC controller seeing inadequate system hydraulic pressure. An iCarsoft reader or Star Diagnosis can read out the pressure and confirm this diagnosis. The pump, pressure sensor, or the controller could each be faulty.
The following users liked this post:
pjsl500 (06-03-2018)
Thank you
