SL/R230: Door panel
#1
Member
Thread Starter
Door panel
I have sl500 r230 I need a drivers side door panel to take apart I need the black plastic on the backside that holds the seat switches in. My door panel is good just need the black plastic to hold the switch in. T/k you
#2
Junior Member
I’ve never seen that piece sold separately, and I looked to replace both of mine as the seat memory/heater and seat movement buttons collapsed inward due to that piece breaking.
For one of my panels, I was able to fashion a wire reinforcement using the 4/5 screws that hold that plastic piece in place. For the other I ended up just buying a whole panel off of eBay.
Good luck.
For one of my panels, I was able to fashion a wire reinforcement using the 4/5 screws that hold that plastic piece in place. For the other I ended up just buying a whole panel off of eBay.
Good luck.
#3
Member
Thread Starter
T/K you. I can not find a drivers side panel I do not need a good one with that part good I seen one on eBay but 400 just too much to just take it apart.