SL/R230: Fitting the Windscreen/deflector
Thread Starter
Member
Joined: Jan 2003
Posts: 134
Likes: 0
From: Cheshire UK
s65AMG, sl500
Fitting the Windscreen/deflector
Still waiting on the Handbook being delivered.
How do you fit the Wind screen/deflector to the car, had the roof down but couldnt figure it out.
And just to make double sure the water tank for the windshield jets is a black one left centre of the engine ?
Thanks for your help
How do you fit the Wind screen/deflector to the car, had the roof down but couldnt figure it out.
And just to make double sure the water tank for the windshield jets is a black one left centre of the engine ?
Thanks for your help
Senior Member
Joined: Feb 2004
Posts: 257
Likes: 0
From: Colts Neck, NJ
08 CL600 Black
Yes, lift the rollbars halfway so that you can still have enough angle to lay the deflector down on the rollbar and position it properly. The plastic snaps need to wrap around the rollbar itself. The deflector is held in place on the rollbar by these snaps.
Super Member
Joined: Jun 2004
Posts: 691
Likes: 0
From: Ponce Puerto Rico
SL500 2003 previous/ E350 2007 actually
Originally Posted by jettie1767
Yes, lift the rollbars halfway so that you can still have enough angle to lay the deflector down on the rollbar and position it properly. The plastic snaps need to wrap around the rollbar itself. The deflector is held in place on the rollbar by these snaps.
MBWorld Fanatic!
Joined: Jul 2004
Posts: 1,111
Likes: 0
From: Memphis
SL500 and A-CLASS
Most important thing that must be done first. Place a cotton towel around the cabin trim and over the top. I have got all my rear cabin trim replace because the MB-tex tore when I just lay the windscreen on top of it. I hate MB-tex.
