SL55/63/65/R230 AMG: 07 third brake light
#26
Newbie
Join Date: Apr 2009
Location: NY.CT
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
SL500,Hummer H2,Yukon Denali XL,S500
THERE SHOULD BE A RECALL ON THE ABC SYSTEM ON THE SL's ,IT SEEMS THEY ALL FAIL TO SOME DEGREE SOONER OR LATER AND COST AROUND $3000.00 TO FIX.THEY GET YOU COMING AND GOING,LOL THE STEALERSHIPS ARE SOME SERIOUS PIRATES.
#27
Junior Member
Join Date: Jan 2004
Location: SF Bay Area
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
2004 SL500 & 2008 GL450
Thanks,
#28
Senior Member
Join Date: Oct 2006
Location: Lynnwood in summer, Fountain Hills during the rainy season in Wa.
Posts: 375
Likes: 0
Received 1 Like
on
1 Post
2008 Maserati QP EGT, 2005 SL55AMG , 2002 CLK55AMG 2002 C230K Coupe
This is what I posted before.
In case anyone is interested on how it's done, I'll give it a try.
1. Open trunk, remove the sill plate rivets, sill plate and pull the liner loose close trunk.
2. Open top to get lid open from the front, (leave top down), remove the two plastic rivets (under the flap that is now open). pop the rest of the clips loose and remove the liner, close top.
3. Open trunk and remove two Torq screws from flap motor and swing down.
4. Remove the two 10mm nuts on the lamp retainer, dont drop the nuts into the lid shell.
5. Push out on the lamp while cutting the sealant around the lamp and pull lamp away from lid, remove connector when lamp assy free.
6. Clean old sealant from lid, I used (Acrylic enamel reducer because it was handy)
7. Fit connector and install new lamp assy in trunk lid, align retainer and push onto lamp, tighten the two 10mm nuts, reinstall flap motor and test light to make sure it works . Close trunk.
8. Open top and reinstall liner then close top, open trunk finish clipping the liner and reinstall sill plate.
9. Done, my time was about 30 min.
Now go wow your friends with your 09 SL63 rear light!
In case anyone is interested on how it's done, I'll give it a try.
1. Open trunk, remove the sill plate rivets, sill plate and pull the liner loose close trunk.
2. Open top to get lid open from the front, (leave top down), remove the two plastic rivets (under the flap that is now open). pop the rest of the clips loose and remove the liner, close top.
3. Open trunk and remove two Torq screws from flap motor and swing down.
4. Remove the two 10mm nuts on the lamp retainer, dont drop the nuts into the lid shell.
5. Push out on the lamp while cutting the sealant around the lamp and pull lamp away from lid, remove connector when lamp assy free.
6. Clean old sealant from lid, I used (Acrylic enamel reducer because it was handy)
7. Fit connector and install new lamp assy in trunk lid, align retainer and push onto lamp, tighten the two 10mm nuts, reinstall flap motor and test light to make sure it works . Close trunk.
8. Open top and reinstall liner then close top, open trunk finish clipping the liner and reinstall sill plate.
9. Done, my time was about 30 min.
Now go wow your friends with your 09 SL63 rear light!
#30
Super Member
Join Date: May 2009
Location: In a VAN down by the river
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
His wifes head hard into the headboard nightly!!