SL55/63/65/R230 AMG: CampioniShop: Introducing MORR's 3 piece series - works of art!
12-13-2011, 04:18 PM
#1
Former Vendor of MBWorld
Thread Starter
CampioniShop: Introducing MORR's 3 piece series - works of art!
As part of an introduction special, CampioniShop has partnered with MORR to offer these amazing wheels to the Mercedes-Benz market at exclusive and aggressive introductory pricing. The 3 piece collection is built very quickly, 2 to 4 weeks turnaround time and they're ready.
For more information on the wheels:
Product List - Category - Wheels / MORR
In 2008, the R&D team at MORR looked into creating a multi-piece wheel program, but was not satisfied with what was being offered at the time. So, in true MORR fashion, the engineering and product development team set out to make a 2pc and 3pc line-up worthy of carrying the MORR name. Their had to be a better option to combine the flexibility of multi-piece wheels with the craftsmanship, engineering, attention to detail, and performance-minded pedigree that is MORR.
Enter the MORR MultiForged™ Collection.
MORR MultiForged™ is MORR’s answer to a far behind 3pc market that has remained stagnant in many aspects of wheel manufacturing technologies. The MORR MultiForged™ collection is as different as it can get when it comes to 3pc wheels. Assembly of a MultiForged™ wheel takes 3 hours per wheel, the back-pad is engineered with torque-assisted mounting and Anti-Water rain grooves for water retention prevention, to virtually eliminate any and all possible vibration issues that can occur. Furthermore, all MultiForged™ wheels receive a low curing powder corrosion protection coat on both the outside and inside barrels for additional corrosion resistance and cosmetic appearance. Lastly, because of the use of proprietary assembly components and techniques we are able to torque our assembly bolts close to 2.5 times more than the traditional multi-piece wheel providing a structure that is more resistance to loads. Our fasteners are are stronger, lighter, and much more resistant to corrosion when compared to the zinc fasteners most companies use. Titanium Fasteners are also available.
Additionally, MORR uses a proprietary silicone sealant that was co-developed with 3M to seal the inner and outer parts. This sealant is specifically designed for modular wheels making it preferable for heat resistance, temperature changes, corrosion, humidity and more. And every wheel is assembled and torqued by hand for utmost care. Aside from all of these features, the MORR MultiForged™ collection includes standard features that are only offered as “optional” features by most. These standard features include but are not limited to:
- Race-Prep Precision Machining
- BackPad Precision Pocketing
- Side-Spoke Precision Pocketing
- Powdercoated Inner & Outer Barrels
All of this precise additional machining adds significant manufacturing cost, but dramatically reduces the weight of the wheel, all while maintaining all of our strength and structural integrity criteria when subjected to FEA Analysis, DOT SAE-J2530 testing, and VIA/JWL Testing and registration.
MultiForged™ is a 3PC Concave product line, that unlike anyone else, uses FORGED 6061-T6 inners, outters AND centers – no extruded, cast, or rolled aluminum in 5000 series to be found anywhere. They are custom made to order, in any finish, offset, or width desired from 19” – 22”.
Right now, the MultiForged™ collection is available in two introductory styles: the MS8 (7-spoke mesh concave 3PC) and the MS10 (10-spoke radial concave 3PC). Our MultiForged™ collection represents the most elite 3PC product on the market, taking us 3-years to fully develop. Anybody can make a 3PC nowadays, but very few, if any, do it right. MORR does it right – on a complete new level.
MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Brushed & Cleared Centers w/ Polished Lip and Silver barrels
*Brushed & Cleared Centers w/ Polished Lip and Silver barrels
MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Brushed Titanium Centers w/ Brushed Titanium Lips and Gunmetal barrels
MORR MultiForged™ MS10 (10-spoke Radial 3pc Concave)
*Gunmetal Centers w/ Brushed Titanium Lips and Gunmetal barrels
Last edited by CampioniShop; 12-13-2011 at 04:58 PM.
12-13-2011, 04:24 PM
#2
Former Vendor of MBWorld
Thread Starter
Feast your eyes on the AutoCoutureMotoring M3 with the MORR Forged MS8s available right here:
http://www.campionishop.com/product/...8/Default.aspx
Enjoy
http://www.campionishop.com/product/...8/Default.aspx
Enjoy
12-13-2011, 06:40 PM
#6
MBWorld Fanatic!
Join Date: Sep 2008
Location: murfreesboro,tn
Posts: 3,152
Likes: 0
Received 0 Likes
on
0 Posts
2003 porsche 996 turbo
ok i gotta ask a stupid question. were the center piece steps over the outer barrel how do you clean the gap? my 32 isnt a daily but dirt still gets all over my 3 piece wheels. seeing the gap i know dirt and dust would find a home there
Trending Topics
02-27-2012, 10:49 PM
#9
Former Vendor of MBWorld
Thread Starter
It's not an AMG, but you guys will love this!
Feast your eyes on this beautiful E92 M3 sporting 20" 3 piece concave MORR MS8 with Textured Gunmetal Centers, Gloss Black Lips, Gloss Black Barrels and Fox Red Inner-Spoke Pocket! The car was put together by Sonic Motorsport.
For more information on MORR wheels, visit:
http://www.campionishop.com/products...?cid=47&clev=1
Feast your eyes on this beautiful E92 M3 sporting 20" 3 piece concave MORR MS8 with Textured Gunmetal Centers, Gloss Black Lips, Gloss Black Barrels and Fox Red Inner-Spoke Pocket! The car was put together by Sonic Motorsport.
For more information on MORR wheels, visit:
http://www.campionishop.com/products...?cid=47&clev=1
03-12-2012, 11:06 PM
#10
Junior Member
Join Date: Nov 2009
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
SL 55 AMG
I was thinking the same thing, guess these are for those who love getting the q-tips out and cleaning their wheels... AKA waxers....
They look nice though on a BMW, not feeling them for an SL
