SL55/63/65/R230 AMG: First hand experience with wheels
#1
Senior Member
Thread Starter
First hand experience with wheels
I am looking for first person/personal experience with any of these vendors:
https://www.carid.com/replace/18-rem...y65280u20.html
http://www.partsgeek.com/mmparts/whe.../sl55_amg.html
http://www.autorimshop.com/mercedes-...rim-65280.html
http://www.wheelsandcaps.com/Mercede...FYEVgQodcbkKFg
Thanks!
https://www.carid.com/replace/18-rem...y65280u20.html
http://www.partsgeek.com/mmparts/whe.../sl55_amg.html
http://www.autorimshop.com/mercedes-...rim-65280.html
http://www.wheelsandcaps.com/Mercede...FYEVgQodcbkKFg
Thanks!
#2
MBWorld Fanatic!
Tomcat,
My recommendation would be to find a good set of used factory wheels. Not these reproductions. Check the used wheel and tire section on this forum and ebay.
Here is a link to factory used wheels from a reputable source.
http://www.allfactorywheels.com/brands/Mercedes.html
My recommendation would be to find a good set of used factory wheels. Not these reproductions. Check the used wheel and tire section on this forum and ebay.
Here is a link to factory used wheels from a reputable source.
http://www.allfactorywheels.com/brands/Mercedes.html
#3
MBWorld Fanatic!
looks like all those are wheel shops that buy old wheels, fix them and resell. they are oem wheels. There are many like this, everyone that says remanfg is the same story. it depends of if they did a good job or not.
#4
Senior Member
Thread Starter
Tomcat,
My recommendation would be to find a good set of used factory wheels. Not these reproductions. Check the used wheel and tire section on this forum and ebay.
Here is a link to factory used wheels from a reputable source.
http://www.allfactorywheels.com/brands/Mercedes.html
My recommendation would be to find a good set of used factory wheels. Not these reproductions. Check the used wheel and tire section on this forum and ebay.
Here is a link to factory used wheels from a reputable source.
http://www.allfactorywheels.com/brands/Mercedes.html
Thanks...I will check
#6
Senior Member
Thread Starter