Mark this thread as Unsold
FS: 05 SLK 350 BREMBO CALIPERS
08-31-2010, 09:34 PM
#31
Senior Member
Well the good news is the calipers got here. The bad news is while bead blasting the first one I found the bleeder valve has been sheared off at some point. You may not have notice, having never tried to install. I didn't even notice it when I took the "before" pictures or that it shows in your original pictures.
Anyone know where I can get a new bleeder valve. I still need to get the broken one out. Looks like some work bench time.
Anyone know where I can get a new bleeder valve. I still need to get the broken one out. Looks like some work bench time.
08-31-2010, 10:05 PM
#32
Senior Member
Join Date: Aug 2005
Location: Folsom Prison PA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
04 Crossfire MB 5.0L M113 V8 6spd, 05 Bagged SRT6w/55K AMG V8 ,2016 C300 Sport
that is an easy fix. all the bleeders are the same on the Brembos.
can you post the part numbers on those bad boys!!
can you post the part numbers on those bad boys!!
08-31-2010, 10:19 PM
#33
Senior Member
VICTORY !
An easy out, a heat gun and some penetrating fluid. Only took about 10 minutes. You just have to be very careful with easy outs this small. If you break it off in the hole, the works difficulty raises exponentially.
An easy out, a heat gun and some penetrating fluid. Only took about 10 minutes. You just have to be very careful with easy outs this small. If you break it off in the hole, the works difficulty raises exponentially.
08-31-2010, 10:33 PM
#34
Senior Member
Caliper one:
back - 20.7915.02
front - 20.7045.04
Caliper two:
back - 20.7915.01
front - 20.7045.03
all mounting arms are stamped 330
09-01-2010, 11:56 AM
#36
Senior Member
Join Date: Aug 2005
Location: Folsom Prison PA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
04 Crossfire MB 5.0L M113 V8 6spd, 05 Bagged SRT6w/55K AMG V8 ,2016 C300 Sport
