James77

Dear Sir,


My question is which one is backing plate in attached file name 1?
Which one are friction plates in the pack (this is about clutch clearance in attached file 2 - Figure 83.)? From #87 ~ #90 or #88~#89 or #88 or #89?



Thank you

Plutoe

Contact the supplier for the correct information!!

exhaustgases

In 1st picture the disks that are dark numbered 88 are frictions, the very bottom is a Bellville spring that absorbs shock. 87 is the backing plate and is all noted at the very bottom of the view. They are showing measuring the pack clearance between the snap ring and the upper portion of the backing plate after everything is assembled.

CDM Motorsports

88 are the clutches, 89 are the steels.