Anybody have a Supercharger Pulley?
06-20-2006, 10:52 PM
#1
Member
Thread Starter
Join Date: Mar 2005
Location: San Diego, CA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55
Anybody have a Supercharger Pulley?
I pulled the supercharger today to really see how everything is layed out, and started pulling the blower apart- there is a machine shop right across the street from me, so i was thinking of ditching the clutch entirely and having a smaller blower pulley made to go along with the crank pulley. In the end i chickened out and put it back together. I figure few would be willing to go through this hassle, but thought i would throw it out there to see if there is an interest in this, or if there is already a pulley out there.
BTW, i personally would much rather do this than the crank pulley- being on my back is a pain in the, well, back! Just not keen on crackin the blower open- can't find a guide online.
BTW, i personally would much rather do this than the crank pulley- being on my back is a pain in the, well, back! Just not keen on crackin the blower open- can't find a guide online.
06-21-2006, 12:57 PM
#3
MBWorld Fanatic!
It won't work. You have to have the clutch installed. I tried hot wiring the clutch so that it was always on and took it for a drive. The second you lift off the gas the car bucks so violently that I thought I ripped the motor from the mounts.
