*** VRP Cams ***
#1
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
*** VRP Cams ***
Just wanted to let everyone know that we are down to our last 3 sets of these cams (I believe its 3 but it might be 2).
I am going to place another order for a second run.
I will leave the pricing at $3,200 shipped for anyone that is interested..
If we get 5 guys together, I'll drop the price to $3,000 shipped.
If we get 10 guys It'll be a sub $3,000 price but I am not sure exactly how much yet.. I need to talk to the manufacturer and see what pricing he will give me on this second run.
Please reply to this thread if you want a set of cams..
Here is what they look like:
I am going to place another order for a second run.
I will leave the pricing at $3,200 shipped for anyone that is interested..
If we get 5 guys together, I'll drop the price to $3,000 shipped.
If we get 10 guys It'll be a sub $3,000 price but I am not sure exactly how much yet.. I need to talk to the manufacturer and see what pricing he will give me on this second run.
Please reply to this thread if you want a set of cams..
Here is what they look like:
#5
Administrator
A bump and a tentative yes but I have some other negotiations going on.
Nine more people are needed.
Victor promises low 11s to high 10s with cams only.
Nine more people are needed.
Victor promises low 11s to high 10s with cams only.
Last edited by Rock; 12-19-2007 at 07:04 AM.
Trending Topics
#8
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Dyno was done a long time ago... Back in October when Albert had the first set put in his car.
Below is the dyno chart... Green is stock pull.. Blue is VRP Cams.. No other changes to the car. Notice the major shift in mid-range between 3,500 and 5,000RPM.. There is 40rwtq difference and 30rwhp.
Below is the dyno chart... Green is stock pull.. Blue is VRP Cams.. No other changes to the car. Notice the major shift in mid-range between 3,500 and 5,000RPM.. There is 40rwtq difference and 30rwhp.
#9
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Other negotiations??? Hmmm... Maybe a set of heads to go along with the cams??? lol...
I think you made a slight error on the 1/4 mile times... I believe I said, they would give you high 9s to low 10s...
I think you made a slight error on the 1/4 mile times... I believe I said, they would give you high 9s to low 10s...
#11
MBWorld Fanatic!
Join Date: Sep 2006
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
06 EuroElites E55
No need to wait I drove my car for the first time today with the cams and I can tell you this it did something good it pulls hard. my butt dyno sucks i didnt realy notice when I first did renn stage 1 but i can tell you i surly noticed this big time. not sure if its HP or TQ but i will post the dyno in a week or so. Im doin other cosmetic mods at this time, but i am very happy so far.
#12
Out Of Control!!
Join Date: Sep 2004
Location: San Diego
Posts: 13,394
Likes: 0
Received 4 Likes
on
4 Posts
2015 S212
No need to wait I drove my car for the first time today with the cams and I can tell you this it did something good it pulls hard. my butt dyno sucks i didnt realy notice when I first did renn stage 1 but i can tell you i surly noticed this big time. not sure if its HP or TQ but i will post the dyno in a week or so. Im doin other cosmetic mods at this time, but i am very happy so far.
#14
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Thanks for the kind words... It's all about sharing information..
Hey Michael!!!! That is awesome.. I am so happy that you are enjoying the car. Have fun and look forward to hearing the results from the next track day.. You should see a nice improvement in your mph & ET..
LOL.. You can feel the cams more than you felt Renntech Stage 1... WOW.. Now I really do feel good.. These things make power.. there is no denying it...
Jesse.. Just say the word, and I'll make it happen!
LOL.. You can feel the cams more than you felt Renntech Stage 1... WOW.. Now I really do feel good.. These things make power.. there is no denying it...
Originally Posted by ROCKETW19
no need to wait I drove my car for the first time today with the cams and I can tell you this it did something good it pulls hard. my butt dyno sucks i didnt realy notice when I first did renn stage 1 but i can tell you i surly noticed this big time. not sure if its HP or TQ but i will post the dyno in a week or so. Im doin other cosmetic mods at this time, but i am very happy so far.
Originally Posted by SLK55R
rocket's car is my benchmark ...
VRUS maybe you can do Heads and Cams for my Renntech SLK?
VRUS maybe you can do Heads and Cams for my Renntech SLK?
Last edited by vrus; 12-20-2007 at 01:29 AM.
#16
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
*** 1 SET LEFT ***
Once this last one is sold, it will take 3 - 4 weeks to get another run made assuming the manufacturer has blanks available.
I will give first right of refusal to ROCK on this last set.. if he passes, then this is your last chance for a pair of these cams until I get the next production run delivered.
Please reply here and let me know if you are interested so I know how many to order.
Thanks!!
Once this last one is sold, it will take 3 - 4 weeks to get another run made assuming the manufacturer has blanks available.
I will give first right of refusal to ROCK on this last set.. if he passes, then this is your last chance for a pair of these cams until I get the next production run delivered.
Please reply here and let me know if you are interested so I know how many to order.
Thanks!!
#17
MBWorld Fanatic!
#19
Out Of Control!
*** 1 SET LEFT ***
Once this last one is sold, it will take 3 - 4 weeks to get another run made assuming the manufacturer has blanks available.
I will give first right of refusal to ROCK on this last set.. if he passes, then this is your last chance for a pair of these cams until I get the next production run delivered.
Please reply here and let me know if you are interested so I know how many to order.
Thanks!!
Once this last one is sold, it will take 3 - 4 weeks to get another run made assuming the manufacturer has blanks available.
I will give first right of refusal to ROCK on this last set.. if he passes, then this is your last chance for a pair of these cams until I get the next production run delivered.
Please reply here and let me know if you are interested so I know how many to order.
Thanks!!
Didn't get a clear answer from before but wanted to make sure. Will these VRP cams be a drop in (with no other modifications) to my current S8 setup?
#20
Banned
Thread Starter
Join Date: May 2004
Location: Richmond Hill, Ontario
Posts: 3,797
Likes: 0
Received 2 Likes
on
2 Posts
2003 E55 AMG
Hey James,
The N/A motors have more piston to valve clearance than the Kompressor cars so in relation to the aggressiveness of the cams, YES, they will definitely clear and drop in..
If a regular W211 cam will drop into a W210 block then these cams will work.. unfortunately, i dont know enough about the W210 to know if the cams are swappable between both generations.
I was hoping someone with more experience in this area would chime in...
The N/A motors have more piston to valve clearance than the Kompressor cars so in relation to the aggressiveness of the cams, YES, they will definitely clear and drop in..
If a regular W211 cam will drop into a W210 block then these cams will work.. unfortunately, i dont know enough about the W210 to know if the cams are swappable between both generations.
I was hoping someone with more experience in this area would chime in...
#23
MBWorld Fanatic!
Join Date: Jul 2005
Location: S.E. FLA.
Posts: 1,224
Likes: 0
Received 6 Likes
on
6 Posts
05 ML-500 , 03 CLK5.5 AMG has left the Garage
Cams!!!
When we went through the development of the grind , We had to look at what was in the market . I had to look at the piston Dish depth, squish bands , Block Deck Height. Our market target was then set to the AMG M-113 V-8 5.5 ,Kompressor, and N/A 11 to 1 motors. So The Answer is YES IT will Fit without any Issues. These Cams tend to like some small amount of additional Fuel, So it works perfectly, because our car engine are already slightly rich, in the upper RPM band. . Happy Hoildays From ___PTE___
#24
MBWorld Fanatic!
A this stage I have half a foot in a 997TT so I aint modding until I resolve this urge to jump ship...
Ugh! what to do?
Ugh! what to do?
#25
MBWorld Fanatic!
Join Date: Feb 2004
Location: Portsmouth, NH
Posts: 1,559
Likes: 0
Received 0 Likes
on
0 Posts
none
When we went through the development of the grind , We had to look at what was in the market . I had to look at the piston Dish depth, squish bands , Block Deck Height. Our market target was then set to the AMG M-113 V-8 5.5 ,Kompressor, and N/A 11 to 1 motors. So The Answer is YES IT will Fit without any Issues. These Cams tend to like some small amount of additional Fuel, So it works perfectly, because our car engine are already slightly rich, in the upper RPM band. . Happy Hoildays From ___PTE___
From what I'm seeing you guys get in gains for a 3K or even sub 3K part there may be some interest to us older M113 guys. I almost want these more than headers but I know I should get the kleemann headers and down pipes first. The cams are worth the sound alone