***In Preparation for MIR 11/15/2008, I purchased a new item for my set up***
#101
someone mention going to a club after the event. Good luck finding one! MIR is pretty much middle of nowhere...You will have to drive atelast an hour back to DC to find anything worth going to.
FYI...
FYI...
#102
MBWorld Fanatic!
#103
Senior Member
#104
MBWorld Fanatic!
Join Date: Sep 2006
Posts: 2,175
Likes: 0
Received 0 Likes
on
0 Posts
06 EuroElites E55
I will leave you to rep the E55s with a 11.2 1/4 mile run no NOS.
#105
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 11 Likes
on
9 Posts
2003 E55 & 2014 GL550
I'm with Rocket unfortunately. Bout the best I can do is fly out for the weekend but that would be torture not having my baby with me.
We'll see.
We'll see.
#106
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
Glad to hear from you mate......
Look, I will wait till Wednesday so we can hook up. The car should be ready by this Wednesday. Maybe we can get Zach to show up also and have a mini meet. EastcoastAMG, Dan, and Zach, if your out there, can you do a week from this Wednesday 8/13??
#107
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
DAYUM.........
I understand, its a huge money and time committment. It's just not right having you guys not racing and set records with our great DA.......
The competition from the West Coast just got a lot WEAKER without you guys!!!!!
#108
Super Member
Join Date: Jul 2007
Posts: 783
Likes: 0
Received 13 Likes
on
11 Posts
2006 s65. Ford Excursion 6.0. Pontiac GTO convertible. Porsche 944 Turbo SCCA car. Wife-E550 and 968
Roland, I'll try to make it next week, have to move something on my calendar... not to hijack, but wanna try to get to ATCO the day before the MIR event? Juice63 said he's going to hit ATCO on 11/14, MIR on 11/15.
#109
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
That sounds like a pretty good plan. How far is ATCO from DC area?? You must be planning on leaving early than on Friday, right?? Is Lee up for it?? I was hoping we all could drive down together.
#110
Senior Member
#113
MBWorld Fanatic!
#114
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
Lee, Kleemann is putting in my Quaife TODAY. The differential was sent overnight to Cory and he should complete the job today and fed ex overnight for Wednesday delivery. If David can put it all back together Wednesday, I am in for the track. Zack has to change a meeting today but I think he is in likewise. I forget the name of the other dude from Boston who went last week. He will want to be informed.
Is the WAGON ready to "rock'n roll" tomorrow. You planning on getting the "boot"??
Is the WAGON ready to "rock'n roll" tomorrow. You planning on getting the "boot"??
#115
MBWorld Fanatic!
I just dropped off my baby at the shop for a little surgery of her own. She goes under the wrench today around noon for a little "Tune-up". I should have her back on Saturday with an extra 100hp thanks to a little help from some N 2 0.
If all goes well, and the weather is good I should be at the Route 66 Test & Tune next Tuesday night running her with the Nitrous and Mickey Thompsons... I'm looking to shatter my previous best times and put the 63 title out of reach for quite a while. I will report back with an update as soon as I get her back. BTW, CF drive shaft should be here first week of September.
MIR here I come!
If all goes well, and the weather is good I should be at the Route 66 Test & Tune next Tuesday night running her with the Nitrous and Mickey Thompsons... I'm looking to shatter my previous best times and put the 63 title out of reach for quite a while. I will report back with an update as soon as I get her back. BTW, CF drive shaft should be here first week of September.
MIR here I come!
#117
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
Ahmad,
Bright sunshine today......Going to the track tonight with others for some fun. No records to be broken tonight due to DA but will have fun..........
Last edited by higginsbeach; 08-13-2008 at 11:09 AM.
#118
Out Of Control!!
#119
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
I just dropped off my baby at the shop for a little surgery of her own. She goes under the wrench today around noon for a little "Tune-up". I should have her back on Saturday with an extra 100hp thanks to a little help from some N 2 0.
If all goes well, and the weather is good I should be at the Route 66 Test & Tune next Tuesday night running her with the Nitrous and Mickey Thompsons... I'm looking to shatter my previous best times and put the 63 title out of reach for quite a while. I will report back with an update as soon as I get her back. BTW, CF drive shaft should be here first week of September.
MIR here I come!
If all goes well, and the weather is good I should be at the Route 66 Test & Tune next Tuesday night running her with the Nitrous and Mickey Thompsons... I'm looking to shatter my previous best times and put the 63 title out of reach for quite a while. I will report back with an update as soon as I get her back. BTW, CF drive shaft should be here first week of September.
MIR here I come!
Hope everything works out for you......No NOS for my engine. Local track wouldn' like me running in the 10.'s very much. They will tolerate the occasional sub 11.49's.
Please VIDEO your runs and may I suggest from the rear of the car for a great vantage point rather from the bleechers. Nothing like watching the car launch from a few feet away and watching the car cross the line and seeing the board at the same time.
Good luck with your mods.......
#120
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
It will be interesting to see if I notice a difference in launching with the QUAIFE. I think I am going to try at least 3 different launch techniques tonight with the QUAIFE t see results of 60'. That's my primary focus tonight is to figure out which technique will yield best 60' results with the QUAIFE....
Take care bro......
#121
MBWorld Fanatic!
Good Luck Jim,
Hope everything works out for you......No NOS for my engine. Local track wouldn' like me running in the 10.'s very much. They will tolerate the occasional sub 11.49's.
Please VIDEO your runs and may I suggest from the rear of the car for a great vantage point rather from the bleechers. Nothing like watching the car launch from a few feet away and watching the car cross the line and seeing the board at the same time.
Good luck with your mods.......
Hope everything works out for you......No NOS for my engine. Local track wouldn' like me running in the 10.'s very much. They will tolerate the occasional sub 11.49's.
Please VIDEO your runs and may I suggest from the rear of the car for a great vantage point rather from the bleechers. Nothing like watching the car launch from a few feet away and watching the car cross the line and seeing the board at the same time.
Good luck with your mods.......
Where did you buy your QUAIFE? I think I need to start shopping for a stronger rear-end and axles, the CF drive shaft should help cushion the final drive a little bit, but once I get the head work and cams I'm sure she will taking more than she'll be able to handle and it's just a matter of time before she blows a rear-end or snaps an axle.
#122
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
Higgensbeach; Thanks, I will be sure to bring a friend to take video next time. As for the track looking down on my times, I have a cage and Sparco harnesses in my car so I'm good to go, At some point I tink I need a parachute, but I'm pretty confident that day will never come.
Where did you buy your QUAIFE? I think I need to start shopping for a stronger rear-end and axles, the CF drive shaft should help cushion the final drive a little bit, but once I get the head work and cams I'm sure she will taking more than she'll be able to handle and it's just a matter of time before she blows a rear-end or snaps an axle.
Where did you buy your QUAIFE? I think I need to start shopping for a stronger rear-end and axles, the CF drive shaft should help cushion the final drive a little bit, but once I get the head work and cams I'm sure she will taking more than she'll be able to handle and it's just a matter of time before she blows a rear-end or snaps an axle.
#123
Super Member
Thread Starter
Join Date: Jul 2007
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
2004 E55 AMG and 2003 C320 4Matic Miss my 993 Turbo above!!
Higgensbeach; Thanks, I will be sure to bring a friend to take video next time. As for the track looking down on my times, I have a cage and Sparco harnesses in my car so I'm good to go, At some point I tink I need a parachute, but I'm pretty confident that day will never come.
Where did you buy your QUAIFE? I think I need to start shopping for a stronger rear-end and axles, the CF drive shaft should help cushion the final drive a little bit, but once I get the head work and cams I'm sure she will taking more than she'll be able to handle and it's just a matter of time before she blows a rear-end or snaps an axle.
Where did you buy your QUAIFE? I think I need to start shopping for a stronger rear-end and axles, the CF drive shaft should help cushion the final drive a little bit, but once I get the head work and cams I'm sure she will taking more than she'll be able to handle and it's just a matter of time before she blows a rear-end or snaps an axle.
You are one serious Motha _ucka. You had a custom roll cage put into the BS 63?? Holy MOTHA..........
#124
MBWorld Fanatic!
Ya, here are a couple of pics before it was installed. I even had it covered in black leather to match the leather in the car, same texture even the same stiching used on OEM steering wheel.
#125
Out Of Control!!