Dyno'd my stock E55 - Wow, you won't believe this.
#26
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
Kleemann claims a drivetrain loss of around 19% for our 55's.
That would calculate at
600hp. Bet you have a strong 55, but 600 bone stock. Ummmmmmmm.
at 18% loss it's
594
and 17% loss it's
586
That would calculate at
600hp. Bet you have a strong 55, but 600 bone stock. Ummmmmmmm.
at 18% loss it's
594
and 17% loss it's
586
#27
MBWorld Fanatic!
Join Date: Mar 2002
Location: South Florida
Posts: 1,662
Likes: 0
Received 1 Like
on
1 Post
STS,FGT,12C,P85D,M4
check the crank pulley, easy to see if it's not stock.... something is off, either the dyno, or the car was modified... even-so, you would need a pulley change, ecu tune and headers to make that kind of power, altough if you hit the speed limiter, sounds like a stock ECU... If it's too good to be true....
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
Last edited by Fikse; 10-05-2008 at 12:45 PM.
#28
MBWorld Fanatic!
Join Date: Sep 2007
Location: South Carolina
Posts: 2,069
Likes: 0
Received 3 Likes
on
3 Posts
2005 E55 ///AMG
check the crank pulley, easy to see if it's not stock.... something is off, either the dyno, or the car was modified... even-so, you would need a pulley change, ecu tune and headers to make that kind of power, altough if you hit the speed limiter, sounds like a stock ECU... If it's too good to be true.... ![drive](https://mbworld.org/forums/images/smilies/driving.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#29
MBWorld Fanatic!
Thread Starter
I don't think so. In fact, compared to all the 55's I test drove before this, this one feels like it was driven by a granny.
Here is a shot of my engine bay:
![](http://i267.photobucket.com/albums/ii305/madflavaj/e55/engine.jpg)
Before the dyno, here is exactly what I had/did:
Temp was misty and 60 degrees.
-1/4 gallon of Chevron 91 with 10% ethanol. (i know, I didn't realize it until I went back to the same station to fill up later.)
-Fresh Oil/filter change 0W40 1 week ago.
-Cut out the "flaps" on the intake. See pic below:
![](http://i267.photobucket.com/albums/ii305/madflavaj/e55/intakecutout.jpg)
And did an ECU/Tranny Reset right before the dyno. That's it. Everybody else's numbers were right on.
Here is a shot of my engine bay:
![](http://i267.photobucket.com/albums/ii305/madflavaj/e55/engine.jpg)
Before the dyno, here is exactly what I had/did:
Temp was misty and 60 degrees.
-1/4 gallon of Chevron 91 with 10% ethanol. (i know, I didn't realize it until I went back to the same station to fill up later.)
-Fresh Oil/filter change 0W40 1 week ago.
-Cut out the "flaps" on the intake. See pic below:
![](http://i267.photobucket.com/albums/ii305/madflavaj/e55/intakecutout.jpg)
And did an ECU/Tranny Reset right before the dyno. That's it. Everybody else's numbers were right on.
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#30
MBWorld Fanatic!
Thread Starter
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Unless some else in the Seattle area wants to let me borrow their G-tech or pay for another dyno run?
![Stick Out Tongue](https://mbworld.org/forums/images/smilies/tongue.gif)
Last edited by str8ridin; 10-05-2008 at 01:06 PM.
#31
Super Member
Join Date: Sep 2002
Location: La Quinta, CALIF.
Posts: 820
Likes: 0
Received 1 Like
on
1 Post
2009 C63 Black on Black
![Talking](https://mbworld.org/forums/images/icons/icon10.gif)
So at 17% drivetrain loss that should equal 514 Crank HP
You have a gem or there are some hidden mods.
Great pulls!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#33
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
Well it's pretty safe to say that it's a fluke and something's not right. You say others got their numbers they expected, but most people expect way too high of numbers when they dyno, especially audi people on forums lol.
#35
MBWorld Fanatic!
Thread Starter
lol, I loved your Audi.
Anyway, here is everybody....the Camaro towards the end was loud as hell just idling and had 100 Shot of NOS.
![](https://i145.photobucket.com/albums/r214/robert2006_photo/100_0634.jpg)
#36
MBWorld Fanatic!
Join Date: May 2003
Location: Khalifonia.
Posts: 6,799
Likes: 0
Received 1 Like
on
1 Post
4 wheeled car.
put it on a dyno jet and let's see for sure
I would want to be certain of the numbers myself and wouldnt trust anything less than a dynojet. **** I hit 410WHP and made an epic video of the run lol.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#37
MBWorld Fanatic!
Thread Starter
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#41
Administrator
![](https://staticssl.ibsrv.net/autocomm/Content/MB/mbwambassador2.gif)
#42
MBWorld Fanatic!
Join Date: Jan 2004
Location: Salt Lake City (but not Morm)
Posts: 7,092
Likes: 0
Received 12 Likes
on
10 Posts
2003 E55 & 2014 GL550
Hope you know we're just busting chops. ![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
One thing is for sure, you got one of the stronger ones (even though she not may be putting out 600hp crank) and THAT is a very good thing.
Compression numbers in the 55 engines vary so much in these friggin things (meaning compression # of each piston due to ring setup). Mine is on the low scale but never uses a drop of oil. Higginsbeach tested near the top of the scale. Bet yours is near there too.
You ever get er to the track, let us know.
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
One thing is for sure, you got one of the stronger ones (even though she not may be putting out 600hp crank) and THAT is a very good thing.
Compression numbers in the 55 engines vary so much in these friggin things (meaning compression # of each piston due to ring setup). Mine is on the low scale but never uses a drop of oil. Higginsbeach tested near the top of the scale. Bet yours is near there too.
You ever get er to the track, let us know.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by Jakpro1; 10-05-2008 at 10:53 PM.
#43
MBWorld Fanatic!
Join Date: Feb 2003
Location: So-Cal
Posts: 3,069
Likes: 0
Received 0 Likes
on
0 Posts
W211 E55 AMG, ML63 AMG, Past 996GT3,ZCPM3,Brabus C32,ML 500
I think my car is ultra quick too..seems Godfathers is slow..lol
Anyway that must of been cool to have a dyno day with all those "Tuner" fanboys and cars and totally blow them all away by 200HP
Anyway that must of been cool to have a dyno day with all those "Tuner" fanboys and cars and totally blow them all away by 200HP
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
#44
MBWorld Fanatic!
I hate to be the bearer of bad news - but that # is simply not possible on a stock car. I use Dyno Dynamics and my apologies to Andy but his comments about Dyno Dynamics are simply not correct. Dyno Dynamics makes the heart breaker dyno and while you can config ANY dyno to give you inflated #s, Dyno Dynamics is by far the most conservative that I have seen. This has been discussed a lot, and I won't go into it further.
A normal 55k car makes 380-390rwhp on a Dyno Dynamics. 370 on the low end, 400 on the high end. I'm not sure what's going on there, but I can assure you, you aren't making 486rwhp. That would equate to ~623bhp![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
-m
A normal 55k car makes 380-390rwhp on a Dyno Dynamics. 370 on the low end, 400 on the high end. I'm not sure what's going on there, but I can assure you, you aren't making 486rwhp. That would equate to ~623bhp
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
-m
#45
MBWorld Fanatic!
Even the Camaro on Nos, did not match the Monster
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#46
MBWorld Fanatic!
#47
MBWorld Fanatic!
after the infamous reflash i was at 330rwhp. after i got my ecu replaced i was back to a normal 383rwhp (all on a dyno dynamics of course).
gotta agree with marcus on this one.
I hate to be the bearer of bad news - but that # is simply not possible on a stock car. I use Dyno Dynamics and my apologies to Andy but his comments about Dyno Dynamics are simply not correct. Dyno Dynamics makes the heart breaker dyno and while you can config ANY dyno to give you inflated #s, Dyno Dynamics is by far the most conservative that I have seen. This has been discussed a lot, and I won't go into it further.
A normal 55k car makes 380-390rwhp on a Dyno Dynamics. 370 on the low end, 400 on the high end. I'm not sure what's going on there, but I can assure you, you aren't making 486rwhp. That would equate to ~623bhp![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
-m
A normal 55k car makes 380-390rwhp on a Dyno Dynamics. 370 on the low end, 400 on the high end. I'm not sure what's going on there, but I can assure you, you aren't making 486rwhp. That would equate to ~623bhp
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
-m
#49
MBWorld Fanatic!
#50
MBWorld Fanatic!
Thread Starter
Ah, at least I got some love.
I totally understand the skepticism though. At least I impressed all the Northwest Quattro guys though. 1/2 of the thread on the dyno day on their site is praising E55's!
Questions:
1: Besides the 1:1 gear ratio, why is it recommended to do the pulls in 4th when our (non chipped) governors kick in and do not let us reach peak HP?
2: What is the difference of getting a pull in 3rd?
3: I don't have any iPhone, so is the Dynolicious app free to download? I'll have a friend who can do it.
4: Anyone willing to pay for another dyno on a dynojet? If the numbers are more than 10% off, you'll get your money back. If they are the same, then...well, you know.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
Questions:
1: Besides the 1:1 gear ratio, why is it recommended to do the pulls in 4th when our (non chipped) governors kick in and do not let us reach peak HP?
2: What is the difference of getting a pull in 3rd?
3: I don't have any iPhone, so is the Dynolicious app free to download? I'll have a friend who can do it.
4: Anyone willing to pay for another dyno on a dynojet? If the numbers are more than 10% off, you'll get your money back. If they are the same, then...well, you know.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)