Heat Wrapping Intake Tubes - Does Work!! (Supporting Data and Pictures)
#101
Former Vendor of MBWorld
Thread Starter
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 292 Likes
on
241 Posts
2003 W211 E55, 2003 W220 S600
I am planning to wrap mine too + get the airbox filters insulated with insulation tape too But I don't have tools to test the temperature but definitely if I did both it will change even a little.
There is another idea to insulate heat from the plastic airbox which is creating a layer from below using materials that when dry it makes like cement (hard) layer. It is possible to apply thin layer that would be a good mod.
I am planning to put the high temperature tape on the airbox filters below and up to insulate heat and hoping that will make better performance.
There is another idea to insulate heat from the plastic airbox which is creating a layer from below using materials that when dry it makes like cement (hard) layer. It is possible to apply thin layer that would be a good mod.
I am planning to put the high temperature tape on the airbox filters below and up to insulate heat and hoping that will make better performance.
#104
MBWorld Fanatic!
Join Date: Dec 2006
Location: Florida-Germany-New York
Posts: 1,123
Likes: 0
Received 30 Likes
on
25 Posts
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
Applying DEI Reflect-A-Gold tape will eliminate any radiant heating. It should be applied to the intake tubes and the outside of the air boxes. This material is used in everything from rockets to F1 cars. See for yourself - - - apply it to your air boxes and the hold the air box an inch or so above the burner on an electric cook top - - - DON'T TOUCH IT TO THE COOK TOP SURFACE! The material will reflect more than 90% of the radiant heat. DO NOT TRY THIS WITH AN OPEN FLAME!
#108
MBWorld Fanatic!
those arent wrapped with heat stuff, its cloth to absorb residual water that may get sucked through the intake, the 05 c230 with the m271 engine has the same thing