Is it possible for a stock E55 to trap 120+?
#26
Jack's car is just plain fast for a stock E55. The last time we had a gathering, for comparison purposes, we had a stock E63 go 113 and a tuned only E55 go 116. At this time Jack's car was trapping 117-118 in 85 degree weather. Plain and simple.....Jack hammered it today and came out with a long awaited accomplishment. Once again great job Jack!!!!! Well deserved.
#27
MBWorld Fanatic!
11-04-2005, 09:18 PM #1
broke1
Junior Member
Join Date: Nov 2005
Posts: 17 1/4 mile times for 03 and up e55's(w211's)
--------------------------------------------------------------------------------
Best run so far for my stock 05 pewter e55:
60' 2.031
1/8 8.099
mph 90.95
1/4 12.381
mph 114.92
This was hot lapping the car with zero cool down and 1k rpm launch's.Im gonna try 2k next time out and see if I can get an 11 second slip.Im certain its there.Car is every bit as impressive as my bolt-on pump gas/alky GN.
K40 is installed and only mod planned is CAI for now.
Whats your best 1/4??
60' 2.031
1/8 8.099
mph 90.95
1/4 12.381
mph 114.92
This was hot lapping the car with zero cool down and 1k rpm launch's.Im gonna try 2k next time out and see if I can get an 11 second slip.Im certain its there.Car is every bit as impressive as my bolt-on pump gas/alky GN.
K40 is installed and only mod planned is CAI for now.
Whats your best 1/4??
Last edited by broke1; 11-04-2005 at 10:34 PM.
https://mbworld.org/forums/w211-amg/...55s-w211s.html
Last edited by juicee63; 11-15-2009 at 03:33 AM.
#28
MBWorld Fanatic!
Jack's car is just plain fast for a stock E55. The last time we had a gathering, for comparison purposes, we had a stock E63 go 113 and a tuned only E55 go 116. At this time Jack's car was trapping 117-118 in 85 degree weather. Plain and simple.....Jack hammered it today and came out with a long awaited accomplishment. Once again great job Jack!!!!! Well deserved.
Jack congrats I said a bunch of factors would need to happen and yes this likely was a one time event.
I invite you to Famoso
#30
The 95 degree thingy makes you a liar. Jacks car in 95 degrees would not be close to 119, funny you discuss your car and a 1/4 mile pass here
11-04-2005, 09:18 PM #1
broke1
Junior Member
Join Date: Nov 2005
Posts: 17 1/4 mile times for 03 and up e55's(w211's)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Last edited by broke1; 11-04-2005 at 10:34 PM.
https://mbworld.org/forums/w211-amg/...55s-w211s.html
11-04-2005, 09:18 PM #1
broke1
Junior Member
Join Date: Nov 2005
Posts: 17 1/4 mile times for 03 and up e55's(w211's)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Last edited by broke1; 11-04-2005 at 10:34 PM.
https://mbworld.org/forums/w211-amg/...55s-w211s.html
That is almost 5 years old when I first bought the car....
There are SEVERAL people who can verify on this site(www.alabamaracingscene.com) the car went mid 7's in the 1/8 at a huge street car shootout a few years ago.The might not remeber the exact #,just that it went mid 7's which would equate to ALOT better than 12.1's,ALOT.
Some people need to get a life......
Ill bet my e55 will burn mr 6000+ posts *** and it would do it STOCK.
#31
Remember,when Motor Trend tested these cars new,a few ran 11.9's@121.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
Last edited by broke1; 11-15-2009 at 12:19 PM.
#32
Remember,when Motor Trend tested these cars new,a few ran 11.9's@121.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
What does working on your car have to do with racing your car . You don't know how to spell mechanical, does that make you less mechanically inclined, no. You and Juicee both said your peace now please leave this thread alone and take all the other bs to pm's. Way too many threads have been getting mucked up by these kinds of arguments. Not trying to be a ***** but let's preserve this thread and keep it positive. This is the exact reason why I wish not to post my times anymore.
BTW...if you think so little of us here on MBW go post somewhere else.
#33
MBWorld Fanatic!
Thread Starter
Remember,when Motor Trend tested these cars new,a few ran 11.9's@121.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
So let me ask you and everyone else this if I said I went faster than 121 would any of you say or come up with "well I know a guy who went 122 stock" I don't care if someone is not a internet or forum junkie, if you run a kick *** run wheter it be et or trap speed post it and be proud!
#35
MBWorld Fanatic!
Remember,when Motor Trend tested these cars new,a few ran 11.9's@121.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
Every car ive seen always runs alot slower than the posted factory times though,esp on this site.I blame it on Benz drivers not knowing what they are doing.Read a few of u guys posts and anyone with mechaincal incling would know most here dont know jack about racing a car or even working on them for that matter.
U wanna talk BS??You saying your car cut a 1.4x 60ft is total!!!No way would these cars cut that without slicks or drag radials and ALOT more mods.
Somthing blew in front of the 60ft timer u poor naive *******.
You should chop off your hands to prevent you from typing. No wonder you have so few posts. Brilliant. Sorry Jack went 120 has it on video and a timeslip and you have 17 posts and a 12.30s car
#36
MBWorld Fanatic!
Thread Starter
#37
MBWorld Fanatic!
Thread Starter