Star Diagnostic How To DIY with lots o pics
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,124
Likes: 32
From: Florida-Germany-New York
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
None whatsoever. Perhaps your speed had been greater than 62 MPH prior to stopping. This will cause the airmatic to lower the car about 3/4" if the ride select was in comfort mode above that speed.
MBWorld Fanatic!
Joined: Oct 2011
Posts: 1,060
Likes: 38
From: USA
'06 E55 AMG
That's it, thank you Ag. Was in Comfort and coming off of 62+MPH. Also, had the radio/nav off to listen to the newly installed MBH headers. Perhaps that's why I was never aware of this before. I appreciate it!
MBWorld Fanatic!
Joined: Oct 2009
Posts: 2,825
Likes: 17
From: Southern California
E55 w/ goods, Z32 Project underway
looking for some help from you guys. i've got two issues.
My first issue is that when i go into Development mode for my ECU I get the following error:
and then it goes in and ALL of the settings are blank
has anyone had the same issue before? I can go into actual values and it will show me the current settings there just fine....
so whats my issue here? do i need to recode it all?
second question is... is there Dev mode in the IC- instrument cluster module? I can go into Dev mode on every other module but the cluster...
My first issue is that when i go into Development mode for my ECU I get the following error:
and then it goes in and ALL of the settings are blank
has anyone had the same issue before? I can go into actual values and it will show me the current settings there just fine....
so whats my issue here? do i need to recode it all?
second question is... is there Dev mode in the IC- instrument cluster module? I can go into Dev mode on every other module but the cluster...
Former Vendor of MBWorld
iTrader: (1)
Joined: May 2008
Posts: 12,139
Likes: 295
From: Houston
2003 W211 E55, 2003 W220 S600
A this has become a convoluted thread with many questions and few answers (folks like secrets here to pay the bills); concerning the above, when I run into this exact issue, I unplug everything, unplug the OBDII, reboot PC, then try again, Almost always works after and the fields are populated. I keep the car off with key out for a minute.
MBWorld Fanatic!
Joined: May 2010
Posts: 1,027
Likes: 55
05 E55 AMG, E320 CDI, Turbo E46 M3,IS300 2JZGTE,VQ35 Turbo Maxima, Mercedes 300D
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Member
Joined: Jan 2012
Posts: 194
Likes: 0
2004 E55 (sold) 2012 E350 4M
http://bayhas.com/mercedes/w211/cont...velcontrol.htm
look at the chart on the bottom....
Newbie
Joined: Apr 2013
Posts: 4
Likes: 0
Mercedes C55 T AMG
question
Hi all,
I have a question. I have a Mercedes C55 AMG T and Star Diagnosis Developer.
Like my Vmax would lift or remove.
I was already in the engine control unit with developers because it says invalid encoding exist! the code 0224 can lift the Vmax to 280! But if you do it and test it sealed off at 250!
Does anyone have an idea?
Thank you
I have a question. I have a Mercedes C55 AMG T and Star Diagnosis Developer.
Like my Vmax would lift or remove.
I was already in the engine control unit with developers because it says invalid encoding exist! the code 0224 can lift the Vmax to 280! But if you do it and test it sealed off at 250!
Does anyone have an idea?
Thank you
Super Member
Joined: May 2011
Posts: 569
Likes: 3
From: Lynnwood,WA
07 E63
so im sitting in my car trying to figure out how to disable the active cornering fog.. anyone know how to do this? the only time i want my fogs on is when i turn them on..tired of people trying to tell me i have a have a fog light out...
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,124
Likes: 32
From: Florida-Germany-New York
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
Easy to do with DAS. Do you have access to DAS?
Super Member
Joined: May 2011
Posts: 569
Likes: 3
From: Lynnwood,WA
07 E63
Super Member
Joined: May 2011
Posts: 569
Likes: 3
From: Lynnwood,WA
07 E63
Can anyone help me out with this? the owner of the DAS wants it back asap.. today is pretty much my last day to be able to do this. oh and id also like to disable the NAV warning at initial start up.
Senior Member
Joined: Apr 2012
Posts: 469
Likes: 9
From: Denver, CO
2015 S550 coupe, 2024 GLC43
CAN'T SHUT DOWN THE TELE AID
If somebody can help, I will really appreciate it. I'm trying to shut down the Tele Aid. In CGW menu, when I'm switching it to "NOT PRESENT", it will not let me do it. Any thoughts? I'm tired of this annoying mafunction.
Member
Joined: Jan 2011
Posts: 101
Likes: 2
From: Southern California
'05 E55, '82 Porsche 911SC, '83 DeLorean
My question is this: I've read where the airmatic system will automatically lower the car after reaching highway speeds in Comfort Mode, or something to that affect. If I lower my E55 to my desired height, will the system still lower it further when I reach highway speeds? I don't want my car looking like a corny muscle car with the back end raked in the air going down the freeway. Or worse, lower it automatically to where it rubs the fenders.
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,835
Likes: 12
From: The Granite State
.
My question is this: I've read where the airmatic system will automatically lower the car after reaching highway speeds in Comfort Mode, or something to that affect. If I lower my E55 to my desired height, will the system still lower it further when I reach highway speeds? I don't want my car looking like a corny muscle car with the back end raked in the air going down the freeway. Or worse, lower it automatically to where it rubs the fenders.
I'm not sure if there is any way to disable it in Star, or if the aftermarket ELMs (Renntech or Programa) will override those factory behaviors.
-G
MBWorld Fanatic!
Joined: May 2003
Posts: 1,100
Likes: 4
From: ChiTown
06 Carrera4
aliexpress.com is about the only link that still works in this thread.
Is anyone interested in selling their Star? (with latest updates hopefully
) id rather get something that has been proven to work.
Is anyone interested in selling their Star? (with latest updates hopefully
) id rather get something that has been proven to work.
MBWorld Fanatic!
Joined: Dec 2006
Posts: 1,124
Likes: 32
From: Florida-Germany-New York
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
