When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I took very little time to investigate the suite if software that came with my "Chinese" D3 star system. I had no trouble using the DAS component. I had a D630 lying around and swapped in the hard drive I received with my system.
i would be mindful to confirm you have the right PC/laptop, check all your cabling, never connect the laptop to the internet (keep the wifi disabled). There are guides available for those attempting to use a new operating system laptop if you search for them.
There is nothing wrong with making money from your interactions on this site but be cautious with those who use PM and email to assist you if they are selling anything. If you are timed limited, you can definitely buy a system with customer support but I would invest time in making sure you have the right setup and connections for what you purchased.
PS...Feel free to PM me but better still you can reply in the open right here.
Wasn't sure how to PM you? Need help - if you can - for replacement cluster MBZ W203 - same part number all works fine but mileage. Need to recode to the OEM miles on the car. I've tried DigiProg III, Vident T702Pro, no help. Limited help for these models, several options with the DiagPro, but got errors using each option. Thks in advance.
Wasn't sure how to PM you? Need help - if you can - for replacement cluster MBZ W203 - same part number all works fine but mileage. Need to recode to the OEM miles on the car. I've tried DigiProg III, Vident T702Pro, no help. Limited help for these models, several options with the DiagPro, but got errors using each option. Thks in advance.
Wasn't sure how to PM you? Need help - if you can - for replacement cluster MBZ W203 - same part number all works fine but mileage. Need to recode to the OEM miles on the car. I've tried DigiProg III, Vident T702Pro, no help. Limited help for these models, several options with the DiagPro, but got errors using each option. Thks in advance.
Wasn't sure how to PM you? Need help - if you can - for replacement cluster MBZ W203 - same part number all works fine but mileage. Need to recode to the OEM miles on the car. I've tried DigiProg III, Vident T702Pro, no help. Limited help for these models, several options with the DiagPro, but got errors using each option. Thks in advance.
Wondering if anyone can help me figure out why my passenger mirror won't tilt when in Reverse on a W251 US-spec chassis.
My car has memory seats (driver/passenger) and memory mirrors, and in the DCM-FR and FL modules it even has "Front passenger exterior mirror with park position function" set to ACTIVE. But whatever I do, I can't get it to function (I tried setting the switch to [R], then adjusting the mirror). I seem to have read somewhere that the specific model year, 2007, saw them disabled (and it's missing from my manual, as well). Is there anything I can do to solve this? Maybe set the car to ROW?
Wondering if anyone can help me figure out why my passenger mirror won't tilt when in Reverse on a W251 US-spec chassis.
My car has memory seats (driver/passenger) and memory mirrors, and in the DCM-FR and FL modules it even has "Front passenger exterior mirror with park position function" set to ACTIVE. But whatever I do, I can't get it to function (I tried setting the switch to [R], then adjusting the mirror). I seem to have read somewhere that the specific model year, 2007, saw them disabled (and it's missing from my manual, as well). Is there anything I can do to solve this? Maybe set the car to ROW?
Think you still need to set it in the instrument cluster under convenience or something.
Hey guys, been looking through STAR for awhile now and still cannot find the Keyless Go function to disable. I went through IC and looked through just about everything and couldn't come up with anything KG that I could select or disable. Think there was a special functions at the end of the IC page that required a password to continue, not sure if I need to go through there or not. Anyone have progressive details on how to navigate there, seems like it should be easily accessible? Thanks.
First of all, for beginners like you, I suggest you always try the function "Functions performed by more that one control unit" before asking.
so its in CGW
and System Diagnosis
should be enough
also, unplug the unit
if you still have issues let me know
and about special functions, yes that is one of the things you don't get with Chinese junk installs
Hi, thanks for the response.
I was looking through "Functions performed by more that one control unit" and couldn’t find anything.
Not seeing a system diagnosis under CGW?
couldn’t really find system diagnosis either? Checked under the submenu’s and can’t really find it either, what would I be doing under system diagnosis to turn off the KG? Just want to make that horrid beeping go away every time I open the door.
and unplug what?
Sorry new to STAR but was able to lower the car and a few other things successfully but still can’t figure out how to get rid of the don’t forget key reminder chimes!
I was looking through "Functions performed by more that one control unit" and couldn’t find anything.
Not seeing a system diagnosis under CGW?
couldn’t really find system diagnosis either? Checked under the submenu’s and can’t really find it either, what would I be doing under system diagnosis to turn off the KG? Just want to make that horrid beeping go away every time I open the door.
and unplug what?
Sorry new to STAR but was able to lower the car and a few other things successfully but still can’t figure out how to get rid of the don’t forget key reminder chimes!
Valuable tool to verify maintenance if hard copies are not available. Only applies if work performed via dealer or a conscientious owner/maintainer.
Playing around with the system and found this via the simulation. Tried it today while performing a B service.
Go to:
-Information and Communication
-Assyst Plus - Plus
-General Servicing
-Service Memory
Peruse the entries that show number of days since Central Gateway enabled, days since last service, mileage at time of service, shop designator, and service items confirmed during the service.
If you don't have access to the hard copy records, the Central Gateway maintains all services in memory so long as the Flexible Service System procedures are followed.
Very nice feature. Makes me look forward to my next Mercedes.
Hi
Could you help check for Vehicle identification number (VIN) WDB2110562B226351
I got high level Log Book, no details of the work done during that service
Like you referred - " Valuable tool to verify maintenance if hard copies are not available. or If you don't have access to the hard copy records, the Central Gateway maintains all services in memory so long as the Flexible Service System procedures are followed. "
I dont have any access, If you have access and check for any vehicle
Like you referred - " Valuable tool to verify maintenance if hard copies are not available. or If you don't have access to the hard copy records, the Central Gateway maintains all services in memory so long as the Flexible Service System procedures are followed. "
I dont have any access, If you have access and check for any vehicle
Thanks
you misunderstood
some data might be stored in your car's modules
the complete but only done by MB dealerships is in the MB online dealer interface
right now, only very few independents have access to that part.