Seattle Dyno Day :: Jan 14th 2010 (Tuning available from James@ACG)
Thread Starter
Super Moderator Alumni
Joined: Dec 2009
Posts: 2,189
Likes: 6
From: USA
2011 GLK 350, 2013 GT-R, & 2013 RAM 1500
Seattle Dyno Day :: Jan 14th 2010 (Tuning available from James@ACG)
Creating a separate post for the W211 crew as no PNW E's are signed up yet.
Here are the details:
Type:
Dynojet Model 424xLC2. Will capture and datalog A/F Ratio, OBDII Data Stream, Horsepower and Torque which are all included with a baseline session (up to six runs).
Location:
Carb Connection
13611 NE 126th Pl. Suite 240
Kirkland, WA. 98034
(425) 820-1871
Date:
01/14/10
Start Time:
10:00am
Group Pricing:
Dyno List/Participants:
1. superlubricity, 2010 C63 - Stock Baseline and Kleemann K1 Tune
2. avengerboater, 2010 C63 - Stock Baseline and Kleemann K1 Tune
3. BeltFedBob, 2005 SL55 - Baseline Only (Kleemann 168mm Pulley, Tune, Headers, Hi-flow Cats and 80mm Throttle Body)
4. DucatiNut, 2006 CLS55 - Baseline Only
5. Francoisisp, 2003 C32 - Baseline Only
6. TruTaing, 2001 C320 - Baseline Only (VRP Shorty Headers, SuperSprint Axle-back Exhaust and AMS/LET Pulleys)
Here are the details:
Type:
Dynojet Model 424xLC2. Will capture and datalog A/F Ratio, OBDII Data Stream, Horsepower and Torque which are all included with a baseline session (up to six runs).
Location:
Carb Connection
13611 NE 126th Pl. Suite 240
Kirkland, WA. 98034
(425) 820-1871
Date:
01/14/10
Start Time:
10:00am
Group Pricing:
- Baseline pulls (no tuning on dyno) - $75 (Reg. price $145)
- Baseline/Tune pulls (with 5-10min delay for flashing the ECU) - $100 to $125
Dyno List/Participants:
1. superlubricity, 2010 C63 - Stock Baseline and Kleemann K1 Tune
2. avengerboater, 2010 C63 - Stock Baseline and Kleemann K1 Tune
3. BeltFedBob, 2005 SL55 - Baseline Only (Kleemann 168mm Pulley, Tune, Headers, Hi-flow Cats and 80mm Throttle Body)
4. DucatiNut, 2006 CLS55 - Baseline Only
5. Francoisisp, 2003 C32 - Baseline Only
6. TruTaing, 2001 C320 - Baseline Only (VRP Shorty Headers, SuperSprint Axle-back Exhaust and AMS/LET Pulleys)
Last edited by superlubricity; Jan 2, 2010 at 12:25 AM.
