you think they will fit. just look really agressive? ill use the size everyone uses 245 30 20 and 285 25 20.... hmmm my friend get really good deals on work wheels i might pull the trigger on them...

 

i wonder how wide these are...

 

looks like 20x11 at least.

Pozdrav!

 

I think you're gonna be running a little too wide man. You definitely won't be able to drop it like the 63 in that pic until you roll the fenders something fierce... Widest set of twinkies I've seen on these cars is 10.5... Somebody can correct me if I'm mistaken.

 

That looks really good. Can't tell from that pic how wide they are, but damn they look money!

 

I put 10.5s on my rear with 285s and there is no way another .5 would fit! Mine are crazy close to the fender!

 

what are you running up front 9's? 245?

 

Those looks really nice with the step lips

 

Work wheels = quality. Although that sounds pretty wide I would call work wheels and ask them if it would work. Mine should be here in 2 months. Sigh

 

+1

I'm runnin a 10.5 with 295's and in sport II, I rub over the smallest bumps. I also rolled my fenders. That's why it's reserved for when the car is parked or if I know the streets like the back of my hand.

 

hey they look sick but do u know what can i put on my car so i can have a at list 4" lip on the back nikovicu

 

I was running 20x10.5 with a 315/25/20 with rolled fenders- hardly any rub. I did have under and over heating spots - switched to 275/30/20

 

Hot dayam! Got any pics? 315's???

 

I do! Let me dig through the files and I'll post it up

 

that silver car. Those look like Renntech monos, but I can't be sure. Maybe it's the application for the SL/CLS, and that's why they are so far out there on the rear...anyone know who owns that car?
I would think that anything over a 10 with a reasonable offset would have a tough time with clearance, especially with the rear ride height lowered.

 

SEE ATTACHMENTS
No rub in comfort, SMALL rub in S2

 

Wow...nice!

I'm the same as you. I'm runnin a 295 and I'm fine in Comfort, when I stick it into Sport II, then it rubs slightly here and there.

 

I like the slammed effect in S2 on the highway at 65- people just STARE, especially when the wheels are freshly polished... but.... due to the current roads here in MD and VA- I'm getting some replica e63 19's with some sturdier sidewall tires. I can't take the beating in these 20s right now- they go away until the roads are fixed.

+1 for your wheel taste- excellent, indeed.
You pwm me all day.

 

Too kind good sir. I am just another fellow enthusiast as yourself! Sometimes I miss havin the HRE's cause they were 19's and I could have some fun, but havin the LM's in 20's on Sport II while on the freeway and havin people stare is priceless. Sometiems when it's parked, I leave it in Sport II and people just sit and stare all day...

Sorry to the OP for going OT. for you

 

is it possible for me to run 295s on a 20x9.5? the norm is 275s but i want wide as possible without rim lookin sucked in tire, lol. 285s or will 295s work?? anyone know?

 

Depends on the offset. My brother is running 20x11s with a 305 tire, no rubs and DUMPED. (cls55)

 

On a e55? I have had 285/25/20s and dumped on a 20x10 rim without any issues. 295 may fit, but would probably rub...

 

I'm just referring to if you or anyone knows if the tires will mount to the rims? I can do mods to the fenders on my clk to make the rims fit but I'm curious if 295s will fit a 9.5rim??

 

I'm running these on a clk320. I figure I can deal with the rubbing by simply rolling/flaring fenders & if absolutely nec I can get a 10mm spacer to prevent rub on springs or inner wheel well. But I'm not lookin to lower my car @ all & have a great eBay deal on a pair of 295/25/20s for my 20x9.5s. Sounds like will likely fit but would need fender mods which isn't a prob 4 me.

 

DAMN WHAT KINDA WHEELS ARE THOSE THATS TITE