Quarter Mile Time Question G-Tech
03-28-2010, 08:54 PM
#1
MBWorld Fanatic!
Thread Starter
Quarter Mile Time Question G-Tech
I ran a 12:75@114.96 with no roll out programed into the g tech, with a throttle ease in to a 2.35 60 ft time,what do you think I could do at the track assuming temp is the same,just a roll out figure that would affect ET
I have run a 12:60 at 115:30 on colder days with a 2.29 60 ft time
I have run a 12:60 at 115:30 on colder days with a 2.29 60 ft time
03-29-2010, 10:59 AM
#2
MBWorld Fanatic!
With my G-tech, I have always beaten the time at the track. Could be better traction, and of course how you set up the G-tech, aka suspension settings.
Example. My road race stang, back in the day, would read a 13.2ish on the G-tech. At the strip it was flat 12's all day long
In my M roadster, it would read 13.1, and at the track it was a 13.0.
SO I would say YES, you will beat those times, but you do need to practice your launch. In my C32 I could get 1.8's, M 2.0's, S600 1.7's
All of the above were/are with street tires
Example. My road race stang, back in the day, would read a 13.2ish on the G-tech. At the strip it was flat 12's all day long
In my M roadster, it would read 13.1, and at the track it was a 13.0.
SO I would say YES, you will beat those times, but you do need to practice your launch. In my C32 I could get 1.8's, M 2.0's, S600 1.7's
All of the above were/are with street tires
