ahmad0658

I would like to get this IC pump instead of Johnson CM 30 pump,

http://www.meziere.com/ps-892-0-WP136S.aspx

But, I am wondering if it will be install and run directly like Johnson IC pump? Does it need any mod?

I would appreciate if someone can give more explanation.

TopGun32

yes.. same 2 cables to wire it.

just bigger and faster.

I have one in my garage, I have yet to install. I can't seem to find a good mounting bracket.. its twice as big as the CM30 pump.

ahmad0658

Thanx for the reply,

anyone has a hint on installing it any mounting available or do I have to fabricate one?

shardul

iTrader: (1)

it mounts vertically on the stock bracket. the bracket you want to use the one that has 3 mounting screws. there are 2 90 pieces of metal on the bracket that need to be grinded off. drill a hole in the bracket and use one of the supplied allen screws to mount the pump. took me 30 mins to do. I had my pump zipp tied first, then AUS-E55 came up with this idea to mount it.

ahmad0658

Thanx a lot Shadul for sharing your experience.

ahmad0658

From what I saw, the cable of the Meziere pump is a little thicker than the stock wiring coming to the Johnson / Bosch pump. Is it ganna be ok and safe from electric work side?

As for mounting we will see what kind of fabrication can be done to solve the issue, I'm heading to the mechanic tomorrow to install it and fabricate the mounting. If everything went fine, I will take pics and hoping to have clear ones.

shardul

iTrader: (1)

yes you can connect the stock wires to the ones that connect to the meziere pump. dont worry about the difference in gauge/thickness of wires.

TopGun32

I'm waiting to see some pics of the install of this pump, then I can give to my mechanic.

If not, I will zip tie the heck of this ****! and install it on my next oil change.

mikey33

Just finished installing yesterday and used two clamp downs and one of the bolts that came with the pump to the bracket on the car.

mikey33

Here are a few pictures.

ahmad0658

Thanx a lot mikey for the information and the pics that you uploaded, they were useful.

Here is mine installed, sorry because the pics are not clear.

We fabricated one mount and we used one clamp to support the pump from up just like mikey (only I used one clamp) and one tightened bolt from below as you can see on the pics.

Roverron

@ Ecoscope you need to update sig with new pump info. LOL.. Also what is your new pump hook to I see H/E hooked up to other lines in picture 009.

ahmad0658

ooh, forgot the signature, Thanx

Well, I can see what you mean, tricky picture really, I just noticed that now. Nothing extra ordenary here, HE is hooked to the pump and that is another line goes to the small HE below the front HE.

ahmad0658

I forget to add that I used different hose instead of the one that goes out of the HE to the pump, the old one, was not good for the set up that I have, so the guy on the workshop got me another one from somewhere and it was cut to fit in the new set up.

chawkins2001

wow, what a nice thread here. I am going to add a meziere when I upgrade the HE.

TopGun32

thanks for the pics guys..

mikey33

No problem. It looks like you got yours on there pretty good also. I am about to wire the pump here today and will take pictures of what I did and post them in the thread I made.

Ohbev

have u seen any changes from the car since fitting the mez pump

MBH motorsports

I was thinking of using this pump in my upcomming projects. If I do, I will make a mounting bracket to fit these AMGs.

redlineAMG

what fittings did you guys use for the rubber hoses to slip onto?

geobens75

meziere has fitting 3/4 barb to -12an o-ring

Hammer Down

do it, I plan on using the Meziere as well someday

cmusngi

Here is the bracket that Motorwerks here in Houston just fabricated this week for two of our CLS 55 AMGs. Twin CLS 55 builds currently in progress.

Shardul, I'm about to send you some photos!


















Ty of Motorwerks working hard!

vietjdmboi

i have a bracket being cnc'd at the moment. should be done tomorrow or so.

chawkins2001

can this pump be used with the stock heat exchanger?