Staff@RPM

We just got our order of power bleeders in stock from Motive. If you do your own brake bleeding in your E than this will make the job easy for you. I was amazed how filthy the brake fluid get's on these cars. Whether you are adding our stainless steel brakes lines or you just want to renew your fluid, this brake bleeder will make the job easy for you.

Motive Power Bleeder- $50.00
Fluid- $15/liter
Stainless Steel brake lines- $150.00/set of four
Project Mu brake pads (coming soon)-
-Front- $375.00
-Rear- $200.00

We have the fluid, stainless steel lines and Motive Bleeders in stock and ready to ship.

shardul

iTrader: (1)

can the power bleeder be used on the SBC system?

Staff@RPM

Yes

komp55

Yes, I used a Motive Bleeder when I installed my Brembo GT kits. The thing to remember is that if you bleed without using SDS, you're only getting a partial bleed since you're not activating the various valves in the SBC control unit. Even so, I was very pleased with the results obtained using the Motive bleeder. Definite thumbs up on that product.

And don't forget to use DOT 4 Plus brake fluid - your SBC's life depends on it.

Staff@RPM

If you would like I can send you instructions on how to bleed the car without the Star and still activate all the valves in the SBC system. I have the instructions from alldata, it's a very silly procedure. If you have a fax number I can fax it to you. I will also send the instructions out with the bleeder if you let me know that you need them.

-craig

GRAFH

What's the part # for the one you sell?