Well it's final...no more e55 for me. Horrible horrible day. But the few that are out there in decent shape are bringing top dollar.

URGENT - I'll mail this out Friday and pay their 15% restock fee if noone wants them: Brand new KMAC Adjustable set for Sl or E (work on a few others too).

IAP-KMAC:502216K KMAC 00-07 Mercedes Front Camber/Caster Kit

Check link for applications...
http://www.iapdirect.com/product.php...4&cat=0&page=1

I paid ~$450 shipped, will do $400 shipped to 48 states if anyone wants them. If noone steps up by Thursday they're going back and I'm eating shipping and a restocking fee

A couple of photos from RIGHT NOW.






More to come.

 

bump still would like prices on parts we talked about

 

Haha theeddie stole the MP wheel...but hasn't installed it yet... $600 (but you gotta go through him...)

 

Like the title says...there is one thread on the drivers side coming out. I could've cut it off but that'd be cheating. And I didn't have a knife.

Also, I used a flash in the shot, the "dust" doesn't show up to the naked eye...these were in the car for maybe 2-3 months. I have no idea what I paid, $100 shipped sound fair?


Rear Mats were never even stepped on:


Drivers:


Thread coming out on drivers...not attached to letters...


And passengers...again very little use.

 

Phenolic thermal spacers - I think I paid $80 and got them from PTE...then had to go spend $60 on gaskets...was planning on installing these with the throttle body this weekend *sigh*...






I have a semi serious buyer claiming the quaife...but here it is documented for everyone's protection...this was part of the $1100 group buy and hasn't been touched, another "planned for this weekend" deal. 2 quarts of MOTUL fluid and the new in box diff shipped for $1000.



Eurocharged Long Tube Headers - paid a little over $2600 shipped (with paypal fees) for these last week..then another $300+ for some high flow cats. Everything is stainless and seems to be awesome build quality. REALLY wish I had a chance to run with them. I'd like to clear at least $2k after all fees shipping, but let me know offers...i have no use for them And know I'm taking an $800+ hit...

Here is where I bought these:
https://mbworld.org/forums/engine-pe...s-midpipe.html

 

Dibs on the mats...
Paypal at the ready!

Sorry for your loss.
What did ya end up getting???

 

you've got em...

Haven't decided yet, thinking m5...maybe a cl600 from this board :x hahah

Performance:
ASP 185mm Crank Pulley and Waterpump Pulley - with BONUS crank pulley removal tool - $750 shipped.






ASP Idler (two pullies, cost $250) and tensioner ($125) pulleys...look cool and have heavy duty bearings to prevent squeaking... $300 shipped paypal.






Get the crank, waterpump, idlers and tensioner for $1k shipped...they all have right at 8k miles on them and always spun true and straight. I should have the proper belt for the crank as well.


I have a stock idler pulley stack, as these are commonly victims to squeaky bearing noise. I had one fail while I was waiting on the ASP ones and ordered these from a dealer overnight...ugh $400 later.

I'll do $150 shipped for the pair...

Johnson CM130 pump - about 12k miles of use, but still runs strong... $125 shipped paypal...Chris- $100 local and it's yours....I wasn't able to grab the HE...



I'm A HUGE fan of cutting out paypal and in person ftf cash deals when possible...seems like UPS/FEDEX and Paypal are the only ones getting a good deal anymore...haha...

ALSO- Package deals- get together with your friends, if someone wants all of it I'd discount substantially...

Two sets of wheels and an 82mm tb to come, stay tuned.


OH- a set of smoked front turn signal cover lenses...perfect shape..$25 shipped paypal? $20 local? Part of me hopes the houston boys come over with a stack of money and steal all these parts from me. Everything is in San Antonio, TX, but I travel all over and will probably be in Houston, Austin, Dallas, Corpus Christi, and who knows where else before the end of the month...

Ebay user id is same as this (gt40mki) and has been since 1998 or so...I worked for ebay, work for autotrader.com, have been selling and buying performance parts on line since before the corral.net had a classifieds board... (1995?)

I'm not here to screw anyone. Any questions or want more pics please don't hesitate to ask, and feel free to make offers on all or part of anything...

-Sean 361.779.2947 cell/txt

 

20" HRE 547r Staggered with like new tires. $2500 takes them.


19" Matte Black iForged ESSEN wheels Staggered with like new General tires...fit great and run even better. Previous owner put fix a flat in the fronts so I'm having them taken apart, cleaned, reassembled and rebalanced. I'm in them for a little over $3k as it stands, probably looking for $2500 for wheels and tires. Got a TON of compliments on these wheels and they are my favorite I've ever run.



These two were taken last week...yeah the front needed to be dropped about half an inch more...

 

How much for spacers and gaskets & TB?

 

So quick recap, and everything is OBO, as I have no use for it:

Camber Kit - $400 shipped (urgent, may use RMA tomorrow...)
Mats $100 (pending)
MP Wheel $600 (sold, but not yet installed)
Spacers with Gaskets - $120 shipped.
Quaife QDF9V with MOTUL fluid $1000 shipped.
Eurocharged LT Headers, intermediate pipes and 200 cel stainless cats. Best offer over $2k + shipping and fees.
185mm Pulley kit w/waterpump pulley and belt AND pulley tool- $750
ASP Idler and tensioner pulleys $300 shipped paypal.
185mm, waterpump, idler and tensioner for $1k shipped.

Stock idler pulleys with less than 500 miles on them $150

CM130 - $125 shipped, $100 local.
20" staggered fit HREs with tires $2500
19" staggered iForged Essens with tires $2500.


Throttle body and adapter housing - $1000..ish.

 

Smoked corner markers (front...) $25 shipped.

 

Asking prices are just that...make an offer if you're interested...worst case I say "no" very politely...

 

I hate you so much


A+++ great seller
I will personally guarantee everything stated above by gt40mki

ill probably end up buying the TB
the Long tubes are a great deal people

 

Oh man, so many nice deals to be had...

 

I take all major credit cards...and Cypress is only about an hour away....(in an AMG) haha...come and take it all!

 

Countdown on the KMACs...may just ship them out today, doesn't seem to be a hot item

 

wow.. a lot of great items GLWS

 

Does payment have to clear first?

 

Let me remind you, you're only about an hour away....

 

will you sell TB adapter separate? what size is adapter made for?

i have the 82mm bosch, just need adapter to install.

lmk, thanks. btw, GLWS

 

To clear up confusion the throttle body and housing are the top right and bottom center parts in the photo below. you will need to swap pins in the TB harness, source or fab the bolt on adapter (bottom right) and modify or source the larger inlet "t" on the left. I was going to run an open element filter.



Sorry I've been out of pocket- had to leave town on business. EMAIL or TXT/Calls get to me much quicker than PMs. email sgibson@gmail.com or 361.779.2947 for a much faster response.

On the wheels...local would be MUCH preferred...but local is almost anywhere in TX in my eyes...

 

A few people have asked me what my "best price" on combinations would be...right now I don't have an e55, or even a 55k powered vehicle I can use this stuff on. It's taking up space and may negatively influence my replacement purchase...

That said, take ALL the performance parts:
Eurocharged LT Headers, intermediate pipes and 200 cel stainless cats.
185mm Pulley kit w/waterpump pulley and belt AND pulley tool
ASP Idler and tensioner pulleys
Thermal Spacers with Gaskets

Take it all for $3000 shipped. You can sort it out and ship and subdivide to resell...

If you're local in Texas and can come pick it up, you can have the HREs with tires and all of the above for $4600.

I don't have ANY use for this stuff, but dont want to lose my shirt more than I have to...it's a complex equation that involves time, space, money and energy, and my $$$/hr may be more than you think...hahah..

Thanks!

 

Can you fix the fronts "toe" also with the KMAC kit?

 

Yeah it's a fully adjustable system and a really neat design..unfortunately I dropped them off at UPS about 6 hours ago...but I think they're worth the $450 new...

 

I have 4 people seriously persuing the "all" performance parts option...looks like this may be done by the weekend.