Biggest TB for E55
#2
MBWorld Fanatic!
#3
Former Vendor of MBWorld
I've always wondered about the SRT-8 throttle bodies. So much so I bought a used SRT8 throttle body on ebay for $50. Its a 6 pin set up, and would mosty like need to be re pinned. I havent gotten around to anything but looking at it yet, and I dont know if I am. Meaning Is that something I'm willing to R&D. Just for talking sake, if it did work that would make SRT8 throttle bodies an option. Some of those go up to 90mm or something on the aftermarket.
#4
MBWorld Fanatic!
Join Date: Nov 2006
Location: California, USA
Posts: 9,137
Likes: 0
Received 4 Likes
on
4 Posts
E63 P30, CL500 Sport
If you're ever going to buy an air box in the future, then I recommend you get the RENNtech 82mm TB + Airbox package. They were the first one to release the 82mm TB and so their airbox works on it without problems. I've heard of a few problems trying to fit the RENNtech air box on the non 82mm TB.
#5
MBWorld Fanatic!
If you're ever going to buy an air box in the future, then I recommend you get the RENNtech 82mm TB + Airbox package. They were the first one to release the 82mm TB and so their airbox works on it without problems. I've heard of a few problems trying to fit the RENNtech air box on the non 82mm TB.
#7
MBWorld Fanatic!
I've always wondered about the SRT-8 throttle bodies. So much so I bought a used SRT8 throttle body on ebay for $50. Its a 6 pin set up, and would mosty like need to be re pinned. I havent gotten around to anything but looking at it yet, and I dont know if I am. Meaning Is that something I'm willing to R&D. Just for talking sake, if it did work that would make SRT8 throttle bodies an option. Some of those go up to 90mm or something on the aftermarket.
I've thought about the SRT8 unit too, but the problem will be the SC inlet. The stock E55 SC inlet can't be bore out to 90mm. The 80mm SC inlet may, but I'm not sure on that.
Trending Topics
#8
MBWorld Fanatic!
I bought my 80MM inlet (Plenum) at the dealer, and after match porting it to the 82mm TB, it had a LOT of room for more. I am sure that the two parts could be mated.. just not sure if the DBW would be compatible.. Maybe my next project can start now? HAHAH kiddin...
#10
Senior Member
Join Date: Mar 2009
Location: Knoxville, TN
Posts: 394
Likes: 0
Received 2 Likes
on
2 Posts
E55, Supercharged Z4 (sold)
What about the Chevy TB's? Anybody mess with these?
http://cgi.ebay.com/ebaymotors/6-0-6...Q5fAccessories
Basically the same thing here:
http://speed-eng.com/store/ls2-90mm-...y-p-10899.html
And a ton of info here:
http://www.chevythunder.com/drive_by_wire.htm
Unfortunately I'm to ignorant on TB's to know what the hell I'm looking at.
http://cgi.ebay.com/ebaymotors/6-0-6...Q5fAccessories
Basically the same thing here:
http://speed-eng.com/store/ls2-90mm-...y-p-10899.html
And a ton of info here:
http://www.chevythunder.com/drive_by_wire.htm
Unfortunately I'm to ignorant on TB's to know what the hell I'm looking at.
Last edited by Luke_M; 12-18-2010 at 09:40 AM.
#11
I've always wondered about the SRT-8 throttle bodies. So much so I bought a used SRT8 throttle body on ebay for $50. Its a 6 pin set up, and would mosty like need to be re pinned. I havent gotten around to anything but looking at it yet, and I dont know if I am. Meaning Is that something I'm willing to R&D. Just for talking sake, if it did work that would make SRT8 throttle bodies an option. Some of those go up to 90mm or something on the aftermarket.
They use a D style connector so you will need an adapter harness to make it work as well as a custom adapter for the supercharger housing. Also they are non serviceable due to VDO manufacture not Bosch.
Basically the same thing here:
http://speed-eng.com/store/ls2-90mm-...y-p-10899.html
http://speed-eng.com/store/ls2-90mm-...y-p-10899.html
Largest on the market currently is 82mm.
Eurocharged is working on an 85mm version of the OEM unit and a 90mm version.
anymore DBW throttle body questions?
#12
Former Vendor of MBWorld
SRT8 is an 80mm throttle body. I assume you mean the Dodge Hemi 5.7/6.1 units.
They use a D style connector so you will need an adapter harness to make it work as well as a custom adapter for the supercharger housing. Also they are non serviceable due to VDO manufacture not Bosch.
They use a D style connector so you will need an adapter harness to make it work as well as a custom adapter for the supercharger housing. Also they are non serviceable due to VDO manufacture not Bosch.