How much the car be lower with STAR?
03-03-2011, 11:28 AM
#28
MBWorld Fanatic!
Join Date: Dec 2006
Location: Florida-Germany-New York
Posts: 1,123
Likes: 0
Received 30 Likes
on
25 Posts
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
Not too good for me as I have a steep angle into the driveway and I clear by about 1/2" when the vehicle is raised to the maximum. Might try a LoMo lowering module which apparently can be set to stock setting when required.
03-03-2011, 11:47 AM
#29
Senior Member
wow, so you are confirming that STAR lowering once done, does not allow you to go to the highest possibly setting in comfort?
03-03-2011, 12:34 PM
#30
MBWorld Fanatic!
Ive heard once lowered with star, that is your new "stock height".. So in comfort it will only adjust up a bit from your new lowered height.. There is no way to go back to stock height unless you adjust it on star again.
03-06-2011, 12:30 PM
#33
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Yep, STAR resets what your car knows as "stock" height. The only way to return to actual mercedes stock height is to hook back up to STAR and redo everything. That is why the ELM is the best solution. On my Renntech V2, there is a setting for stock height. You hit that and it goes back to the origianal MB preset stock height. That is why I always say the ELM is the real only good solution to lowering these cars.
