Some updates with my car *pics*
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
Some updates with my car *pics*
Well I really don't have time to mess with my car much now due to school but I am trying to somewhat get it ready for the supra nationals (tx2k11) here in Houston march 17-20.
I just recently had the car tinted with 35% tint all around and it really transformed the car in appearance. The windows all match along with the panoramic roof.
I also got MT ET Street tires in a 255/50/16 mounted on some old MB rims. However, as I was messing around I noticed the lug hole was a 12mm and not a 14mm like on our cars. So I either need to find a rim shop to enlarge them or I can get a drill bit and do it myself.
Finally, my headers are done. My buddy was busy with school and trying to finish up a twin turbo kit for a mustang that the headers had to be placed on hold. Well after a month or so they were finally done. I am going to send them off to TCC for a ceramic coating before going on the car.
I will be getting a baseline and after header dyno numbers as soon as I can.
Coming soon..
Titanium dual intake
custom vband x pipe
![](http://i122.photobucket.com/albums/o268/vietjdmboi/189020_10150409970200230_551105229_17638486_5655387_n.jpg)
![](http://i122.photobucket.com/albums/o268/vietjdmboi/183205_10150405633830230_551105229_17592497_3643533_n.jpg)
I just recently had the car tinted with 35% tint all around and it really transformed the car in appearance. The windows all match along with the panoramic roof.
I also got MT ET Street tires in a 255/50/16 mounted on some old MB rims. However, as I was messing around I noticed the lug hole was a 12mm and not a 14mm like on our cars. So I either need to find a rim shop to enlarge them or I can get a drill bit and do it myself.
Finally, my headers are done. My buddy was busy with school and trying to finish up a twin turbo kit for a mustang that the headers had to be placed on hold. Well after a month or so they were finally done. I am going to send them off to TCC for a ceramic coating before going on the car.
I will be getting a baseline and after header dyno numbers as soon as I can.
Coming soon..
Titanium dual intake
custom vband x pipe
![](http://i122.photobucket.com/albums/o268/vietjdmboi/189020_10150409970200230_551105229_17638486_5655387_n.jpg)
![](http://i122.photobucket.com/albums/o268/vietjdmboi/183205_10150405633830230_551105229_17592497_3643533_n.jpg)
![](http://i122.photobucket.com/albums/o268/vietjdmboi/189970_10150410299340230_551105229_17641893_5063045_n.jpg)
#4
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
finally dropped off the rims to get drilled. trying to get some much done before the supercars start rolling in.
also installed this..
![](http://i122.photobucket.com/albums/o268/vietjdmboi/4cafb923.jpg)
dont mind the dirty car.
also installed this..
![](http://i122.photobucket.com/albums/o268/vietjdmboi/4cafb923.jpg)
dont mind the dirty car.
Last edited by vietjdmboi; 03-14-2011 at 03:40 PM.
#5
Super Member
I didn't know you were local to Houston. I'll be rolling out west for the free Dyno day on Friday around 11am. They're doing free dynos from 9-5.
What day were you planning on going out? I think I was going to try and meet Shardul out there too.
What day were you planning on going out? I think I was going to try and meet Shardul out there too.
#6
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
ill be there at 9am friday morning. i plan on spending the whole day there then head out at night for the fun runs. remember to dyno is free but its on a first come basis.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
thanks shardul. are you talking about the night meet at franknstein? or the track for drag racing? regardless, ill be at everything. cant miss any of this.
#10
Super Member
Where are you finding this? Supraforums? Couldn't find it in the 6speedonline thread.
This is for Friday night? I'll be down for some fun. shardul has my #. I've got obligations all day Saturday unfortunately.
FUARK. Thursday afternoon/evening is going to be busy. I fabbed up some goodies for my car that aren't 100% yet, but I'm dailying them all this week to see if there's any appreciable difference in my IATs or Cooling.
Shardul, how quickly could we split my circuit if I picked up a reservoir?
If you would, PM me or link the forum where I can get on that list...I'd be 111-120mph.
This is for Friday night? I'll be down for some fun. shardul has my #. I've got obligations all day Saturday unfortunately.
FUARK. Thursday afternoon/evening is going to be busy. I fabbed up some goodies for my car that aren't 100% yet, but I'm dailying them all this week to see if there's any appreciable difference in my IATs or Cooling.
Shardul, how quickly could we split my circuit if I picked up a reservoir?
If you would, PM me or link the forum where I can get on that list...I'd be 111-120mph.
#18
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
ran an is300 last night. it had a gte swap with a 67mm turbo @18psi. from a 60mph roll we were dead even..and from a 40mph i would jump out about half a car or so but he would reel me in up top. eh not bad for such little mods.
http://www.youtube.com/watch?v=ZAfwLIRU3ms
http://www.youtube.com/watch?v=ZAfwLIRU3ms
Last edited by vietjdmboi; 03-19-2011 at 04:10 PM.
#19
MBWorld Fanatic!
Clean car! I like the drag setup. Let us know how it performs.
#20
Senior Member
Thread Starter
Join Date: Apr 2010
Location: Anaheim, CA
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
'04 E55 AMG
thanks. i love these tires. i have no more traction issues while driving around with the TC off.
I think im going to bit the bullet and do a full aluminum exhaust. I have been talking to a few fabricators (toxicfab and unobtainium)who have done a handful of aluminum exh with no complaint.
here is a picture of a customer of unobtainium who has a full aluminum exh on his camaro.
I think im going to bit the bullet and do a full aluminum exhaust. I have been talking to a few fabricators (toxicfab and unobtainium)who have done a handful of aluminum exh with no complaint.
here is a picture of a customer of unobtainium who has a full aluminum exh on his camaro.
#21
PLATINUM SPONSOR
Very nice! Nice drag tire and wheel set up!
__________________
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
![](https://mbworld.org/forums/signaturepics/sigpic87171_15.gif)
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#22
Super Member
thanks. i love these tires. i have no more traction issues while driving around with the TC off.
I think im going to bit the bullet and do a full aluminum exhaust. I have been talking to a few fabricators (toxicfab and unobtainium)who have done a handful of aluminum exh with no complaint.
here is a picture of a customer of unobtainium who has a full aluminum exh on his camaro.
![](http://www.higherarcing.org/yahoo_site_admin/assets/images/IMG_8740.300205645_large.JPG)
I think im going to bit the bullet and do a full aluminum exhaust. I have been talking to a few fabricators (toxicfab and unobtainium)who have done a handful of aluminum exh with no complaint.
here is a picture of a customer of unobtainium who has a full aluminum exh on his camaro.
How much does that run? Seems like the aluminum alone must be a pretty penny.