Top HP Numbers
#51
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
To reach 600 rwhp on a stock blower is going to be damn near impossible. A cobra will reach 700 rwhp with a Kenne Bell or Whipple but not even close with the stock eaton. My stock ported eaton maxed out on race gas right around ~550 rwhp. With a big 2.6H KB on pump gas makes 620 rwhp and with a smaller pulley on the blower and race gas makes 710 rwhp. I have run my rave tune a total of 3 times over 3 years on the street, the car is just stupid. With 315 Mickey Tompson drag radials on my PUMP tune will smoke them through the top of third. I have done almost every suspension mod trying to get it to hook but once you reach a certain power level it just kills tires. The other thing is that the rest of the car has to be set up to handle 700 rwhp. I have blown up 2 rears, 3 half shafts, and 3 T56 6 speed transmissions. You will just keep finiding the next weakest link and it gets really old and expensive very quickly. Unless you just want to have a dyno queen and be able to say you make xxx rwhp just get the car to 500-550 rwhp and be done with it. I have bought my Cobra all over again with just mods and fixing broke parts!!
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#53
MBWorld Fanatic!
Join Date: May 2009
Location: Abu Dhabi
Posts: 1,484
Likes: 0
Received 13 Likes
on
9 Posts
C218 CLS63TT PP Edition1, W213 E63S
that blower is for the older E55 W210. not for W211 E55K.
i think e55K can bee reached to 800hp like the SLR. but cooling cooling cooling is the key here. and larger injectors with >82 TB. and every other mod; cams, intake, etc.
i think e55K can bee reached to 800hp like the SLR. but cooling cooling cooling is the key here. and larger injectors with >82 TB. and every other mod; cams, intake, etc.
#54
MBWorld Fanatic!
Thread Starter
I agree, cooling is the key but like it was said before, companies don't care about this engine. There's just not much money to be made. So there's custom, which is expensive and usually can't match the R&D of a big company with funding a facility to work with. Credit is given that some people have come up with their own DIY cooling solutions but what we need is a company produced product with warranty that has been tested to work and is efficient and light. It's not that big of a problem if a reputable company does it. Evosport? Renntech? Kleeman? Come on guys ![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
#57
MBWorld Fanatic!
#58
MBWorld Fanatic!
Thread Starter
What they said ^^^^^
We need dedicated tuning, you haven't really paid attention to the 55k. People are prepared to pay for REAL solutions if you make them, but hey if you dislike Benjamins then that's ok, I'll hang on to mine
We need dedicated tuning, you haven't really paid attention to the 55k. People are prepared to pay for REAL solutions if you make them, but hey if you dislike Benjamins then that's ok, I'll hang on to mine
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
#59
Super Member
http://www.evosport.com/product/mbz/
#61
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
http://www.evosport.com/product/prod...ER.M5K.PPC.211
Not enough, have you seen the SLR coolers? Their size?
Not enough, have you seen the SLR coolers? Their size?
#62
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
You mean like headers, pulleys, IC pump/ h/e / phenolic spacer package, lightweight rotors, bigger TB, exhaust?
http://www.evosport.com/product/mbz/
http://www.evosport.com/product/mbz/
#63
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
honda civics have the biggest tuner market and theres a reason... its one of the most massed produced vehicles and dirt cheap so theres millions of kids willing to modify the crap out of them and if they blow the motor big deal, they got car for $1500
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
really, the cheaper and more accessible the car is to the general public, the more tuner market there will be... this is why there isnt a big Bugatti tuner market
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#64
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
thats because it was mass produced and so many of them
.. not as many e55 amgs and most of the people that bought them are not really into tuning so we get a small batch or tuners availible...
honda civics have the biggest tuner market and theres a reason... its one of the most massed produced vehicles and dirt cheap so theres millions of kids willing to modify the crap out of them and if they blow the motor big deal, they got car for $1500
really, the cheaper and more accessible the car is to the general public, the more tuner market there will be... this is why there isnt a big Bugatti tuner market![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
honda civics have the biggest tuner market and theres a reason... its one of the most massed produced vehicles and dirt cheap so theres millions of kids willing to modify the crap out of them and if they blow the motor big deal, they got car for $1500
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
really, the cheaper and more accessible the car is to the general public, the more tuner market there will be... this is why there isnt a big Bugatti tuner market
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#65
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
My point was, there may be a billion Grand Prix's....but how many grand prix owners actually race them, and worse, mod them. As an example, I know of 3 E55 here in PR that have been moded. Yet, with the exception of my previous Grand Prix which I turbocharged, I have no knowledge of a single grand prix here in PR that has actually been moded. They are all junkers...lol.
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
no kidding i see that kiinda crap plenty of times traveling through the south... and same thing for camaros, mustangs, firebirds and transams
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#66
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
My point was, there may be a billion Grand Prix's....but how many grand prix owners actually race them, and worse, mod them. As an example, I know of 3 E55 here in PR that have been moded. Yet, with the exception of my previous Grand Prix which I turbocharged, I have no knowledge of a single grand prix here in PR that has actually been moded. They are all junkers...lol.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
![](http://i700.photobucket.com/albums/ww2/myfunstore_345/RedneckCamaro4x4.jpg)
#67
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
well your prob right for sure about grand prix in PR as its more if a redneck car, but i bet if you go to alabama, kentucky or similar southern state then you would see some grand prixs with giant blowers sticken out the hood with rebel flag on the roof made to look like dukes of hazard with posi-trac on the rear and drag slicks
pulling up to light and lookiing over and saying "gitter done" ![drive](https://mbworld.org/forums/images/smilies/driving.gif)
no kidding i see that kiinda crap plenty of times traveling through the south... and same thing for camaros, mustangs, firebirds and transams![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![drive](https://mbworld.org/forums/images/smilies/driving.gif)
no kidding i see that kiinda crap plenty of times traveling through the south... and same thing for camaros, mustangs, firebirds and transams
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
![Stick Out Tongue](https://mbworld.org/forums/images/smilies/tongue.gif)
#68
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
i wish we could get these cars under 9 sec but that would take same thing it takes for all the evo guys and audi guys... stipped out interior, no dash no air, 15inch rims, chunky tires, 30+ psi boost, race fuel and some more...
but then my womens wouldnt want to ride in my car anymore without all the fancy stuff that weighs it down
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#69
MBWorld Fanatic!
Thread Starter
![Wink](https://mbworld.org/forums/images/icons/icon12.gif)
Stripped out interior? Sub 9s? I know we want to modify our cars to be fast but this is a Mercedes, it's blasphemy to strip it's interior and turn it into a redneck dragster. What's the point too, I mean why not just get a Corvette or Supra? This car wasn't ment for that, I'm pretty sure you didn't buy your car to strip it. I think we can safely say the interior and comfort are a GOOD thing.
If you really wants a street driven 4 door monster you need to spend alot of money on weight savings
1. Lightweight Battery
2. Lightweight Wheels (HRE claim they're working on a Dymag style wheel)
3. KW Coilovers (with the towers and the pumps and everything from AirMatic DUMPED)
4. Carbon Fiber Driveshaft
5. Carbon Ceramic Brakes (not sure if the car would accept Brembo Carbon Ceramics)
6. Bucket Seats (AMG or Status seats) (or HPF M3 seats 6 lb per seat!!)
7. Tools and Spare Removal
8. Full Titanium Exhaust (not sure if there is, might have to be custom)
9. Full Dry Carbon Body (roof, hood, trunk, bumpers, guards, side skirts) (custom job)
10. Replace Lug nuts and other bolt and nuts with Ti ones
11. Custom CF bumper support beams and radiator bracket (crazy I know)
12. You can look for other small ways which are too much to list, listed the big ones
Approximate Weight Saving 440-550 lb
(Pano more towards 550 lb if you replace it with dry carbon)
This is all hypothetical though, only a guide to the extremes you can go to and still have a full interior with only bucket seats as a mod. It would cost time and money and is not feasible unless you LOVE your car. Pretty sure the dealer with also not be happy with pretty much replacing 50% of the car, you would also need a place for all the custom bodywork and the Titanium Exhaust. If you do though you would have a car with lower weight than an M5, C63, M3, RS6, RS4, Murcielago, GT-R etc etc.
Point is if your engine is putting out 600 wheel, which some here are, your car will be mid 10s to low 10s with radials EASY, power like that with the weight savings like those can't go wrong, it's Physics!! Plus it would still be a 4 door 5 seater and full interior and soundproofing. Not sure about the Brembo Carbon Ceramics but even with Evosport rotors you'd be looking at massive rotating and unsprung weight reduction. Unsprung weight is the coilovers, brakes, wheels and the rotating would be the CF driveshaft, lightweight wheels and brakes. It would dramatically change the car's handling, braking and acceleration. Maybe some carbon sway bars and bracings could be done for the handling to make the car stiff.
All in all this would be out of love or boredom and definitely WAY too much money
so it is HYPOTHETICAL so don't burn me about how its not worth it
If you really wants a street driven 4 door monster you need to spend alot of money on weight savings
1. Lightweight Battery
2. Lightweight Wheels (HRE claim they're working on a Dymag style wheel)
3. KW Coilovers (with the towers and the pumps and everything from AirMatic DUMPED)
4. Carbon Fiber Driveshaft
5. Carbon Ceramic Brakes (not sure if the car would accept Brembo Carbon Ceramics)
6. Bucket Seats (AMG or Status seats) (or HPF M3 seats 6 lb per seat!!)
7. Tools and Spare Removal
8. Full Titanium Exhaust (not sure if there is, might have to be custom)
9. Full Dry Carbon Body (roof, hood, trunk, bumpers, guards, side skirts) (custom job)
10. Replace Lug nuts and other bolt and nuts with Ti ones
11. Custom CF bumper support beams and radiator bracket (crazy I know)
12. You can look for other small ways which are too much to list, listed the big ones
Approximate Weight Saving 440-550 lb
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
This is all hypothetical though, only a guide to the extremes you can go to and still have a full interior with only bucket seats as a mod. It would cost time and money and is not feasible unless you LOVE your car. Pretty sure the dealer with also not be happy with pretty much replacing 50% of the car, you would also need a place for all the custom bodywork and the Titanium Exhaust. If you do though you would have a car with lower weight than an M5, C63, M3, RS6, RS4, Murcielago, GT-R etc etc.
Point is if your engine is putting out 600 wheel, which some here are, your car will be mid 10s to low 10s with radials EASY, power like that with the weight savings like those can't go wrong, it's Physics!! Plus it would still be a 4 door 5 seater and full interior and soundproofing. Not sure about the Brembo Carbon Ceramics but even with Evosport rotors you'd be looking at massive rotating and unsprung weight reduction. Unsprung weight is the coilovers, brakes, wheels and the rotating would be the CF driveshaft, lightweight wheels and brakes. It would dramatically change the car's handling, braking and acceleration. Maybe some carbon sway bars and bracings could be done for the handling to make the car stiff.
All in all this would be out of love or boredom and definitely WAY too much money
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
Last edited by e500slr; 06-23-2011 at 08:05 AM.
#70
MBWorld Fanatic!
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 202 Likes
on
155 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
Stripped out interior? Sub 9s? I know we want to modify our cars to be fast but this is a Mercedes, it's blasphemy to strip it's interior and turn it into a redneck dragster. What's the point too, I mean why not just get a Corvette or Supra? This car wasn't ment for that, I'm pretty sure you didn't buy your car to strip it. I think we can safely say the interior and comfort are a GOOD thing.
If you really wants a street driven 4 door monster you need to spend alot of money on weight savings
1. Lightweight Battery
2. Lightweight Wheels (HRE claim they're working on a Dymag style wheel)
3. KW Coilovers (with the towers and the pumps and everything from AirMatic DUMPED)
4. Carbon Fiber Driveshaft
5. Carbon Ceramic Brakes (not sure if the car would accept Brembo Carbon Ceramics)
6. Bucket Seats (AMG or Status seats) (or HPF M3 seats 6 lb per seat!!)
7. Tools and Spare Removal
8. Full Titanium Exhaust (not sure if there is, might have to be custom)
9. Full Dry Carbon Body (roof, hood, trunk, bumpers, guards, side skirts) (custom job)
10. Replace Lug nuts and other bolt and nuts with Ti ones
11. Custom CF bumper support beams and radiator bracket (crazy I know)
12. You can look for other small ways which are too much to list, listed the big ones
Approximate Weight Saving 440-550 lb
(Pano more towards 550 lb if you replace it with dry carbon)
This is all hypothetical though, only a guide to the extremes you can go to and still have a full interior with only bucket seats as a mod. It would cost time and money and is not feasible unless you LOVE your car. Pretty sure the dealer with also not be happy with pretty much replacing 50% of the car, you would also need a place for all the custom bodywork and the Titanium Exhaust. If you do though you would have a car with lower weight than an M5, C63, M3, RS6, RS4, Murcielago, GT-R etc etc.
Point is if your engine is putting out 600 wheel, which some here are, your car will be mid 10s to low 10s with radials EASY, power like that with the weight savings like those can't go wrong, it's Physics!! Plus it would still be a 4 door 5 seater and full interior and soundproofing. Not sure about the Brembo Carbon Ceramics but even with Evosport rotors you'd be looking at massive rotating and unsprung weight reduction. Unsprung weight is the coilovers, brakes, wheels and the rotating would be the CF driveshaft, lightweight wheels and brakes. It would dramatically change the car's handling, braking and acceleration. Maybe some carbon sway bars and bracings could be done for the handling to make the car stiff.
All in all this would be out of love or boredom and definitely WAY too much money
so it is HYPOTHETICAL so don't burn me about how its not worth it
![action](https://mbworld.org/forums/images/smilies/action1.gif)
If you really wants a street driven 4 door monster you need to spend alot of money on weight savings
1. Lightweight Battery
2. Lightweight Wheels (HRE claim they're working on a Dymag style wheel)
3. KW Coilovers (with the towers and the pumps and everything from AirMatic DUMPED)
4. Carbon Fiber Driveshaft
5. Carbon Ceramic Brakes (not sure if the car would accept Brembo Carbon Ceramics)
6. Bucket Seats (AMG or Status seats) (or HPF M3 seats 6 lb per seat!!)
7. Tools and Spare Removal
8. Full Titanium Exhaust (not sure if there is, might have to be custom)
9. Full Dry Carbon Body (roof, hood, trunk, bumpers, guards, side skirts) (custom job)
10. Replace Lug nuts and other bolt and nuts with Ti ones
11. Custom CF bumper support beams and radiator bracket (crazy I know)
12. You can look for other small ways which are too much to list, listed the big ones
Approximate Weight Saving 440-550 lb
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
This is all hypothetical though, only a guide to the extremes you can go to and still have a full interior with only bucket seats as a mod. It would cost time and money and is not feasible unless you LOVE your car. Pretty sure the dealer with also not be happy with pretty much replacing 50% of the car, you would also need a place for all the custom bodywork and the Titanium Exhaust. If you do though you would have a car with lower weight than an M5, C63, M3, RS6, RS4, Murcielago, GT-R etc etc.
Point is if your engine is putting out 600 wheel, which some here are, your car will be mid 10s to low 10s with radials EASY, power like that with the weight savings like those can't go wrong, it's Physics!! Plus it would still be a 4 door 5 seater and full interior and soundproofing. Not sure about the Brembo Carbon Ceramics but even with Evosport rotors you'd be looking at massive rotating and unsprung weight reduction. Unsprung weight is the coilovers, brakes, wheels and the rotating would be the CF driveshaft, lightweight wheels and brakes. It would dramatically change the car's handling, braking and acceleration. Maybe some carbon sway bars and bracings could be done for the handling to make the car stiff.
All in all this would be out of love or boredom and definitely WAY too much money
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![action](https://mbworld.org/forums/images/smilies/action1.gif)
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
but that highlights why there is such a huge mod market for honda civic and not mercedes, bugatti, lambo, ferrari , etc... the owners of these cars are not willing to go to the extremes as civic owners and for good reason - we have way nicer cars
![Big Grin](https://mbworld.org/forums/images/smilies/biggrin.gif)
#72
MBWorld Fanatic!
Thread Starter
I think they are refering to our future mod.
![naughty](https://mbworld.org/forums/images/smilies/naughty.gif)
![Loser](https://mbworld.org/forums/images/smilies/loser.gif)
#73
MBWorld Fanatic!
Thread Starter
Havoc I had a look at your VRP 5.7 build, impressive stuff! Did you get any problems with reliability and did you actually dyno the car? Plus how is the cooling, you mentioned "SLR type cooling" in the project page. Also why did VRP get banned from the forum? Also one more thing did your RPM limit change? Did the engine redline become lower or did the engine take more time to rev up due to the larger piston and displacement size?
#74
MBWorld Fanatic!
Join Date: Dec 2007
Location: Sin City
Posts: 1,862
Likes: 0
Received 4 Likes
on
3 Posts
2005 E55 AMG - - 2005 SL55 AMG - - - - - - 2006 SLK55 AMG - - - - - - 2013 Ducati Diavel AMG -
Havoc I had a look at your VRP 5.7 build, impressive stuff! Did you get any problems with reliability and did you actually dyno the car? Plus how is the cooling, you mentioned "SLR type cooling" in the project page. Also why did VRP get banned from the forum? Also one more thing did your RPM limit change? Did the engine redline become lower or did the engine take more time to rev up due to the larger piston and displacement size?
#75
MBWorld Fanatic!
Thread Starter
I guess maybe you should have tried the cooling solution with the unmodified car to see just how much it made a difference. But seriously in your opinion is the whole 5.7 displacement increase necessary?
Plus did you ever get to video or dyno it? You were going for 1000hp?!!
.....and people give me beef for even speaking of 650whp. I love your initiative and dedication though, separates the enthusiasts from the lazy accountants (no offense accountants). You also said 50k on the project was spent
To be honest I think the stock block and and displacement with the mods you did like the crank and the forged pistons and like you said, Ti rods. Beef up the internals to the point where you know you have a bit of safety and work with it. You sent the engine back to Canada a couple of times, I bet that cost some $$ right?
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![Rcain](https://mbworld.org/forums/images/smilies/rcain.gif)