TB shaft grind, and now code P0507
#26
Senior Member
Join Date: Feb 2009
Location: Germany
Posts: 278
Received 0 Likes
on
0 Posts
E55 AMG W211 - sold, CLS 500 C219, E63S AMG W212
Sorry ''bump'' :-)
I don't have access to a Star.
If I follow the TB harness down to the back of the engine by the y-pipe and disconnect it.
Should be the engine running?
I don't have access to a Star.
If I follow the TB harness down to the back of the engine by the y-pipe and disconnect it.
Should be the engine running?
Last edited by munich55; 08-25-2011 at 07:45 AM. Reason: .
#28
Junior Member
Join Date: Apr 2013
Location: Sarasota, Florida
Posts: 51
Likes: 0
Received 2 Likes
on
2 Posts
2004 E55 AMG
I know this is an old thread but...
I had a similar P0505 / P0507 after doing the throttle body grind and it turned out to be the fact that I didn't properly torque the surge tanks which I removed and painted at the same time.
I thought it might help someone else to know this.![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
FYI, Shardul says that proper torque is 20Nm which is about 14.76 foot pounds.
Be careful not to snap, and tighten in a criss-cross pattern.
D-
I thought it might help someone else to know this.
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
FYI, Shardul says that proper torque is 20Nm which is about 14.76 foot pounds.
Be careful not to snap, and tighten in a criss-cross pattern.
D-