porting heads
Thread Starter
MBWorld Fanatic!
Joined: Sep 2008
Posts: 3,152
Likes: 0
From: murfreesboro,tn
2003 porsche 996 turbo
porting heads
i post here as there is more racing going on here than anywere. so to the point! if someone wanted to inc the airflow thru the heads who would be the mechanic to do it? i know my 3.2 s.c engine has more power to give and im not a fan of the larger crank pulleys with the install issues and the higher heat issues.
i can log 19 psi with my c3 pulley and wonder what porting and polishing the heads would do for building better hp. more to the point who would be a wrench i could trust not to screw my heads up?
i can log 19 psi with my c3 pulley and wonder what porting and polishing the heads would do for building better hp. more to the point who would be a wrench i could trust not to screw my heads up?
Thread Starter
MBWorld Fanatic!
Joined: Sep 2008
Posts: 3,152
Likes: 0
From: murfreesboro,tn
2003 porsche 996 turbo
thanx . im familiar with the process what im searching for is the name of a shop that specializes in benzes to do this. dont trust my parts to the local speed shop that builds a hundred stangs. their good but doubt they understand the mercedes head and were the power is to be found
