SpeeDriven Shop Blog
#101
MBWorld Fanatic!
holy ****... how do you not understand that shops like Evosport and Speedriven are businesses. businesses have one thing on their mind, and that's to make money.
If Speedriven constantly has PAYING customers coming through the door asking for upgrades starting from ECU flashes to upraded turbos, do you honestly believe they are going to turn away work just because they have some E55 headers to develop that they MIGHT sell 10 sets of?
it's all about priorities, and they got theirs in order. The E55 platform is almost 10 yrs old and whether you like it or not, shops have to move on with the times and develop products for new, updated platforms. Just because 5 years ago 3 vendors would have new products coming out every 2 months, doesnt mean that the trend that will continue.
Bottom line, the answer to your question is simple. The shop has more profitable work that takes up their time and developing a set of E55 headers is VERY low on their priority list, as it should be.
If Speedriven constantly has PAYING customers coming through the door asking for upgrades starting from ECU flashes to upraded turbos, do you honestly believe they are going to turn away work just because they have some E55 headers to develop that they MIGHT sell 10 sets of?
it's all about priorities, and they got theirs in order. The E55 platform is almost 10 yrs old and whether you like it or not, shops have to move on with the times and develop products for new, updated platforms. Just because 5 years ago 3 vendors would have new products coming out every 2 months, doesnt mean that the trend that will continue.
Bottom line, the answer to your question is simple. The shop has more profitable work that takes up their time and developing a set of E55 headers is VERY low on their priority list, as it should be.
#103
MBWorld Fanatic!
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
Looks like that was directed at me. I must of had a secret bottle when i ran 10.54,10.56 and 10.58 with the bottle out of the car or maybe when i did use nitrous it ran 10.52@118 coasting thru the traps any normal person would be able to figure out when it was on spray but not you. Like always your pissed because you car is still in the 11's and you got your a** handed to you by a BMW and its all over the internet. Every heard the saying run what ya brung and hope ya brung enough?? They made that saying for you.
#104
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
How bout a more relevant Q will you buy either hmmm thot not you're a joke, if it's not a used POS part or "beat ta' sh*t" no way itll be on ur salvaged titled heap O sh*te
#105
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
holy ****... how do you not understand that shops like Evosport and Speedriven are businesses. businesses have one thing on their mind, and that's to make money.
If Speedriven constantly has PAYING customers coming through the door asking for upgrades starting from ECU flashes to upraded turbos, do you honestly believe they are going to turn away work just because they have some E55 headers to develop that they MIGHT sell 10 sets of?
it's all about priorities, and they got theirs in order. The E55 platform is almost 10 yrs old and whether you like it or not, shops have to move on with the times and develop products for new, updated platforms. Just because 5 years ago 3 vendors would have new products coming out every 2 months, doesnt mean that the trend that will continue.
Bottom line, the answer to your question is simple. The shop has more profitable work that takes up their time and developing a set of E55 headers is VERY low on their priority list, as it should be.
If Speedriven constantly has PAYING customers coming through the door asking for upgrades starting from ECU flashes to upraded turbos, do you honestly believe they are going to turn away work just because they have some E55 headers to develop that they MIGHT sell 10 sets of?
it's all about priorities, and they got theirs in order. The E55 platform is almost 10 yrs old and whether you like it or not, shops have to move on with the times and develop products for new, updated platforms. Just because 5 years ago 3 vendors would have new products coming out every 2 months, doesnt mean that the trend that will continue.
Bottom line, the answer to your question is simple. The shop has more profitable work that takes up their time and developing a set of E55 headers is VERY low on their priority list, as it should be.
And again...why are you still trying to bring me and my car into this when all I asked was a simple question? LOL..Still deviating I see....butthurt anyone?
#106
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
Wow...I never though so much pain could come out of a simple question...lol. I was genuinely curious for the answer...but I guess all the leg humpers have led me to the obvious answer...lol.
Guys, you don't have to defend your daddy so fiercely...why not just let Speedriven answer the question properly and let them take care of themselves. Or is it customary to be Speedriven's lawyers whenever someone asks an "inconvenient" question?
Someone calls me slow and I have to take it, but when I say they are slow compared to other cars with similar power their butt buddy comes out and also says I'm slow....have you even tested your 700+whp car at the track?...If not, doesn't that, technically, make my car faster than yours? LOLL.
Guys, you don't have to defend your daddy so fiercely...why not just let Speedriven answer the question properly and let them take care of themselves. Or is it customary to be Speedriven's lawyers whenever someone asks an "inconvenient" question?
Someone calls me slow and I have to take it, but when I say they are slow compared to other cars with similar power their butt buddy comes out and also says I'm slow....have you even tested your 700+whp car at the track?...If not, doesn't that, technically, make my car faster than yours? LOLL.
Last edited by GT-ER; 04-27-2012 at 04:29 PM.
#108
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
you should ask Gaspam, he spewed why does his 851 whp car that weighs only about 300lbs more than an e55 run 2/10ths slower than the 600whp e55's out there [/QUOTE] Thet're have been a multitude of E55's on Spray, I happen to like you & Ahmad.
I was elaborating retorting to gspazz NOT YOU on E55's on bottle period.. THOUGH now you bring it up I do find it hard to stomach your explanation on Nitrous on Dyno then hmmm huh about a baby 40 shot in 1 gear during 1/4 whatever..
I was elaborating retorting to gspazz NOT YOU on E55's on bottle period.. THOUGH now you bring it up I do find it hard to stomach your explanation on Nitrous on Dyno then hmmm huh about a baby 40 shot in 1 gear during 1/4 whatever..
#109
MBWorld Fanatic!
This is why my post count always seems to decrease year after year...Nothing constructive to read upon. Now wonder mercedes can't hold it's value.
It's amazing how other members behave in other forums... Everyone helps each other out and always try to encourage positive behavior and comments. I do come back here when I want a good laugh though.
It's amazing how other members behave in other forums... Everyone helps each other out and always try to encourage positive behavior and comments. I do come back here when I want a good laugh though.
#110
Wow...I never though so much pain could come out of a simple question...lol. I was genuinely curious for the answer...but I guess all the leg humpers have led me to the obvious answer...lol.
Guys, you don't have to defend your daddy so fiercely...why not just let Speedriven answer the question properly and let them take care of themselves. Or is it customary to be Speedriven's lawyers whenever someone asks an "inconvenient" question?
Someone calls me slow and I have to take it, but when I say they are slow compared to other cars with similar power their butt buddy comes out and also says I'm slow....have you even tested your 700+whp car at the track?...If not, doesn't that, technically, make my car faster than yours? LOLL.
Guys, you don't have to defend your daddy so fiercely...why not just let Speedriven answer the question properly and let them take care of themselves. Or is it customary to be Speedriven's lawyers whenever someone asks an "inconvenient" question?
Someone calls me slow and I have to take it, but when I say they are slow compared to other cars with similar power their butt buddy comes out and also says I'm slow....have you even tested your 700+whp car at the track?...If not, doesn't that, technically, make my car faster than yours? LOLL.
I consider your car very slow compared with other E55 with less mods.
#111
I was elaborating retorting to gspazz NOT YOU on E55's on bottle period.. THOUGH now you bring it up I do find it hard to stomach your explanation on Nitrous on Dyno then hmmm huh about a baby 40 shot in 1 gear during 1/4 whatever..[/quote]
No, on his best pass he had the Nitrous bottle in his truck
#112
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
Way to come in and try to take a stab at me for no apparent reason...lol.
Btw- my car put down 507 on one dyno, 496 on another, 490 uncorrected for both, and 463 on a mustang. Figure whatever you want from it.
Btw- my car put down 507 on one dyno, 496 on another, 490 uncorrected for both, and 463 on a mustang. Figure whatever you want from it.
Last edited by GT-ER; 04-27-2012 at 06:29 PM.
#113
MBWorld Fanatic!
GT-ER, Im pretty sure speeddriven did awnser your question about the headers-another employee took the project on......
Can we get this thread back about the supercharger upgrade, or do you guys want to **** on eachother some more.
Can we get this thread back about the supercharger upgrade, or do you guys want to **** on eachother some more.
#114
MBWorld Fanatic!
Wait, Ricker you lost to a BMW?
Where is this link ahah
Where is this link ahah
#115
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
Not really a loss, the guy had every mod possible Race map @ 19-20 psi + 150-200 shot of nitrous lite dragwheels on 16-17 Hoosier slicks vs my pure heavy st setup on 91 oct, he ran race gas & nitrous + stripped interior lies like a rug about mods, we did 3-4 runs, even w/that edge from 40- 130-140 he couldn't pull on my sl600 1" till past 100-110 mph tot joke i was on st heavy 295/30 19x11' s st tires 91 oct 1/2 tank + heatsoaked as I drove 1+ hrs to meet in his town where lil' Moleman sat stuffing his gobstopper w/IN'N'OUT w/fresh cool engine etc.. Race doesn't even count, I even beat him few times & ran even up to 140'ish @ which point he claimed his 10lb nos bot empty he had 1/8/1/4 tank of 109
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
Last edited by Thericker; 04-27-2012 at 08:37 PM.
#117
MBWorld Fanatic!
Not really a loss, the guy had every mod possible Race map @ 19-20 psi + 150-200 shot of nitrous lite dragwheels on 16-17 Hoosier slicks vs my pure heavy st setup on 91 oct, he ran race gas & nitrous + stripped interior lies like a rug about mods, we did 3-4 runs, even w/that edge from 40- 130-140 he couldn't pull on my sl600 1" till past 100-110 mph tot joke i was on st heavy 295/30 19x11' s st tires 91 oct 1/2 tank + heatsoaked as I drove 1+ hrs to meet in his town where lil' Moleman sat stuffing his gobstopper w/IN'N'OUT w/fresh cool engine etc.. Race doesn't even count, I even beat him few times & ran even up to 140'ish @ which point he claimed his 10lb nos bot empty he had 1/8/1/4 tank of 109
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
He's a peasant, not even worthy to line up with a R/C helicopter toy
#118
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
Not really a loss, the guy had every mod possible Race map @ 19-20 psi + 150-200 shot of nitrous lite dragwheels on 16-17 Hoosier slicks vs my pure heavy st setup on 91 oct, he ran race gas & nitrous + stripped interior lies like a rug about mods, we did 3-4 runs, even w/that edge from 40- 130-140 he couldn't pull on my sl600 1" till past 100-110 mph tot joke i was on st heavy 295/30 19x11' s st tires 91 oct 1/2 tank + heatsoaked as I drove 1+ hrs to meet in his town where lil' Moleman sat stuffing his gobstopper w/IN'N'OUT w/fresh cool engine etc.. Race doesn't even count, I even beat him few times & ran even up to 140'ish @ which point he claimed his 10lb nos bot empty he had 1/8/1/4 tank of 109
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
He can't even run 10.9x @ strip more like 11.38 while Clays SL600 w/my ECU ONLY MOD from OE runs 11.02 @126+ You be the judge w/this info, vs lying pussboy in 335i that he later grenaded Tranny due to running soooo much nitrous. Just look up his old speedo vidz he says he runs 6.7 60-130 & 137 Trap speeds my *** vid looks CGI enhanced ahhh vent over
BTW- I haven't received a reply as to your track times on your SL....have you taken it to the track?
#119
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
Doubt my SL will run faster than Clay's 600 that routinely runs basement 11's on ECU only? I'm here waiting anytime in So Cal, I'll pay for both track fees & your chickencoop airfair ticket until then STFUP all you are is static w/mighty 11.90 @ 119 oooooooo scuuurrryyy Can't believe you think that's fast @ least 2-3 bone STOCK E55's run that & faster Think Enzom ran 11.77 you're a JOKE! Change your sig to Pewter Turtle, beast WTF lololol
#120
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
Guy I owe you squat, the 335 tool lied about EVERYTHING, MOSTLY nitrous amount stating it was only a 70 shot, I went to his forum & dug up posts by his fellow members where they ALL say he's full of sh*t & why his tranns blew worse than 1 of your puerto rican hookers go look @ the last few pages of the 60-130 thread here in w211 forums...
Doubt my SL will run faster than Clay's 600 that routinely runs basement 11's on ECU only? I'm here waiting anytime in So Cal, I'll pay for both track fees & your chickencoop airfair ticket until then STFUP all you are is static w/mighty 11.90 @ 119 oooooooo scuuurrryyy Can't believe you think that's fast @ least 2-3 bone STOCK E55's run that & faster Think Enzom ran 11.77 you're a JOKE! Change your sig to Pewter Turtle, beast WTF lololol
Doubt my SL will run faster than Clay's 600 that routinely runs basement 11's on ECU only? I'm here waiting anytime in So Cal, I'll pay for both track fees & your chickencoop airfair ticket until then STFUP all you are is static w/mighty 11.90 @ 119 oooooooo scuuurrryyy Can't believe you think that's fast @ least 2-3 bone STOCK E55's run that & faster Think Enzom ran 11.77 you're a JOKE! Change your sig to Pewter Turtle, beast WTF lololol
I never took you for one of those internet bench racers...damn.
Last edited by GT-ER; 04-28-2012 at 08:34 AM.
#121
MBWorld Fanatic!
Join Date: Sep 2008
Location: murfreesboro,tn
Posts: 3,152
Likes: 0
Received 0 Likes
on
0 Posts
2003 porsche 996 turbo
speedriven CAME TO THE M112K crowd and asked if we wanted the headers and needed to know if there was interest . 10 deposits later they had the interest they wanted.
the employee you speak of was in possesion of a set of vrp headers to use as a template to build a better version BEFORE he came to work for speedriven and was fabbing a set for me.
since speedriven took over the header build they have produced the flanges and end parts. from what i know they have a single set finished and either the fit and finish werent up to standards or they didnt make power. since the employee doesnt work there anymore i no longer know. hence the question .
so how about this, give the m112k crowd a estimated finish date instead of the same drivel you gave us on the other forum and on here. shoot even a pic of something other than parts on a table would be nice.
heres the original post on the other forum. dated 09/28/11
Real Crossfire Headers - These ain't no stinkin' log style manifolds!!!
We've been looking for a way to carve our niche with the Crossfire crowd and after discussing what aftermarket is available for this car and what is not, something we noticed that was missing were real headers. Not a fancy log style manifold that simply mimics the inefficiencies of the factory ones but something that would offer real performance benefits for both the N/As and SRTs alike. We are gauging interest on this and need two things to get the ball rolling. First, we need to see how many people are legitimately interested in these based off a $100 deposit group buy. Retail will be $1299 and if we collect 10 or more deposits, work will commence with a $1049 group buy sale price. If we get to 20 or more, the group buy sale price will be $999. After we determine the number of those interested, we will need a local owner with a minimally modified N/A for design, fitment and testing. Later on, we will need a minimally modified SRT6 so we can test and document it's gains as well. These will be made so they are completely compatible with both factory and aftermarket exhaust on the N/As and SRTs.
Now for what everyone wants to know; How much power will they make? We are confident we will see somewhere in the neighborhood of 15-20rwhp gains with the N/As and 20-30rwhp on the SRTs. The factory exhaust manifolds are very restrictive. It's design was dictated on keeping manufacturing costs low and production high. Log style manifolds follow in the same footsteps. Real headers allow the motor to breath much easier because instead of just cramming all the exhaust into a log and hoping for the best, it merges the slugs of exhaust one behind the next and as such, reduces back-pressure and increases power.
Last edited by 320 dreamer; 04-28-2012 at 08:06 AM.
#122
MBWorld Fanatic!
Join Date: Jun 2010
Location: Puerto Rico
Posts: 4,173
Likes: 0
Received 6 Likes
on
5 Posts
2005 E55 AMG
since i asked the original question let me clarify a few things.
speedriven CAME TO THE M112K crowd and asked if we wanted the headers and needed to know if there was interest . 10 deposits later they had the interest they wanted.
the employee you speak of was in possesion of a set of vrp headers to use as a template to build a better version BEFORE he came to work for speedriven and was fabbing a set for me.
since speedriven took over the header build they have produced the flanges and end parts. from what i know they have a single set finished and either the fit and finish werent up to standards or they didnt make power. since the employee doesnt work there anymore i no longer know. hence the question .
so how about this, give the m112k crowd a estimated finish date instead of the same drivel you gave us on the other forum and on here. shoot even a pic of something other than parts on a table would be nice.
heres the original post on the other forum. dated 09/28/11
Real Crossfire Headers - These ain't no stinkin' log style manifolds!!!
We've been looking for a way to carve our niche with the Crossfire crowd and after discussing what aftermarket is available for this car and what is not, something we noticed that was missing were real headers. Not a fancy log style manifold that simply mimics the inefficiencies of the factory ones but something that would offer real performance benefits for both the N/As and SRTs alike. We are gauging interest on this and need two things to get the ball rolling. First, we need to see how many people are legitimately interested in these based off a $100 deposit group buy. Retail will be $1299 and if we collect 10 or more deposits, work will commence with a $1049 group buy sale price. If we get to 20 or more, the group buy sale price will be $999. After we determine the number of those interested, we will need a local owner with a minimally modified N/A for design, fitment and testing. Later on, we will need a minimally modified SRT6 so we can test and document it's gains as well. These will be made so they are completely compatible with both factory and aftermarket exhaust on the N/As and SRTs.
Now for what everyone wants to know; How much power will they make? We are confident we will see somewhere in the neighborhood of 15-20rwhp gains with the N/As and 20-30rwhp on the SRTs. The factory exhaust manifolds are very restrictive. It's design was dictated on keeping manufacturing costs low and production high. Log style manifolds follow in the same footsteps. Real headers allow the motor to breath much easier because instead of just cramming all the exhaust into a log and hoping for the best, it merges the slugs of exhaust one behind the next and as such, reduces back-pressure and increases power.
speedriven CAME TO THE M112K crowd and asked if we wanted the headers and needed to know if there was interest . 10 deposits later they had the interest they wanted.
the employee you speak of was in possesion of a set of vrp headers to use as a template to build a better version BEFORE he came to work for speedriven and was fabbing a set for me.
since speedriven took over the header build they have produced the flanges and end parts. from what i know they have a single set finished and either the fit and finish werent up to standards or they didnt make power. since the employee doesnt work there anymore i no longer know. hence the question .
so how about this, give the m112k crowd a estimated finish date instead of the same drivel you gave us on the other forum and on here. shoot even a pic of something other than parts on a table would be nice.
heres the original post on the other forum. dated 09/28/11
Real Crossfire Headers - These ain't no stinkin' log style manifolds!!!
We've been looking for a way to carve our niche with the Crossfire crowd and after discussing what aftermarket is available for this car and what is not, something we noticed that was missing were real headers. Not a fancy log style manifold that simply mimics the inefficiencies of the factory ones but something that would offer real performance benefits for both the N/As and SRTs alike. We are gauging interest on this and need two things to get the ball rolling. First, we need to see how many people are legitimately interested in these based off a $100 deposit group buy. Retail will be $1299 and if we collect 10 or more deposits, work will commence with a $1049 group buy sale price. If we get to 20 or more, the group buy sale price will be $999. After we determine the number of those interested, we will need a local owner with a minimally modified N/A for design, fitment and testing. Later on, we will need a minimally modified SRT6 so we can test and document it's gains as well. These will be made so they are completely compatible with both factory and aftermarket exhaust on the N/As and SRTs.
Now for what everyone wants to know; How much power will they make? We are confident we will see somewhere in the neighborhood of 15-20rwhp gains with the N/As and 20-30rwhp on the SRTs. The factory exhaust manifolds are very restrictive. It's design was dictated on keeping manufacturing costs low and production high. Log style manifolds follow in the same footsteps. Real headers allow the motor to breath much easier because instead of just cramming all the exhaust into a log and hoping for the best, it merges the slugs of exhaust one behind the next and as such, reduces back-pressure and increases power.
Now Speedriven should step in and better explain the situation. Perhaps they should have refunded the money they took and when they completed the project they could take the money again? I mean, the interest was there obviously. I dunno, I'll let them step in.
This is what I wanted with my original question before the leghumpers screwed it all up.
#123
Super Member
Join Date: Mar 2006
Location: Chicago
Posts: 514
Likes: 0
Received 0 Likes
on
0 Posts
CL65
He posted it in late September? That's not exactly "nearly a year ago". That's 7 months ago, which is long as hell, but you shouldn't make it longer than it really is.
Now Speedriven should step in and better explain the situation. Perhaps they should have refunded the money they took and when they completed the project they could take the money again? I mean, the interest was there obviously. I dunno, I'll let them step in.
This is what I wanted with my original question before the leghumpers screwed it all up.
Now Speedriven should step in and better explain the situation. Perhaps they should have refunded the money they took and when they completed the project they could take the money again? I mean, the interest was there obviously. I dunno, I'll let them step in.
This is what I wanted with my original question before the leghumpers screwed it all up.
Last edited by MarkoCL65; 04-28-2012 at 12:38 PM.
#124
Banned
Thread Starter
Well hello, lol, that got out of hand quickly
I want to be very clear with the promises and progress of the headers of the 32 and srt6 group buy. ( Which I dont even know why honestly was brought into this thread. A phone call or email, or even a reply in the appropriate section would have sufficed and I would have responded accordingly, now I probably need to create a new thread for the whipple kit.)
The headers were a project that was started by another former employee with the intention of having a well made shorty style header available for the 32 and srt6 crew. He posted to see if people were interested, and they were, so deposits were sent to reserve places. The flanges on both sides of the headers were then sent out to the CNC mill and 10 sets were made. All of the necessary piping was also purchased along with the 3-1 collectors. The cost of just the materials were significantly more than the amount of the deposits, which should show that the project is serious. A jig was built along with a set of development headers, which were supposed to be tested on two cars, both of which backed out, which leaves us without a car for fitment. The development of the headers is still underway, and now dropped on our shoulders as the employee that started them is no longer here.
Please forgive me if any details have been left out as I am simply stating what I know as I came into the shop. The project was started well before I started here and I want to assure people that I am going to handle it accordingly and have the project completed in a timely manner. If anyone has an issue I will do whatever is necessary to correct the situation, including refunding deposits, but we already have a 8 person waiting list that will fill those places.
In regards to the whipple juicy updates coming next week in a new thread
Thanks!!
Aleks
I want to be very clear with the promises and progress of the headers of the 32 and srt6 group buy. ( Which I dont even know why honestly was brought into this thread. A phone call or email, or even a reply in the appropriate section would have sufficed and I would have responded accordingly, now I probably need to create a new thread for the whipple kit.)
The headers were a project that was started by another former employee with the intention of having a well made shorty style header available for the 32 and srt6 crew. He posted to see if people were interested, and they were, so deposits were sent to reserve places. The flanges on both sides of the headers were then sent out to the CNC mill and 10 sets were made. All of the necessary piping was also purchased along with the 3-1 collectors. The cost of just the materials were significantly more than the amount of the deposits, which should show that the project is serious. A jig was built along with a set of development headers, which were supposed to be tested on two cars, both of which backed out, which leaves us without a car for fitment. The development of the headers is still underway, and now dropped on our shoulders as the employee that started them is no longer here.
Please forgive me if any details have been left out as I am simply stating what I know as I came into the shop. The project was started well before I started here and I want to assure people that I am going to handle it accordingly and have the project completed in a timely manner. If anyone has an issue I will do whatever is necessary to correct the situation, including refunding deposits, but we already have a 8 person waiting list that will fill those places.
In regards to the whipple juicy updates coming next week in a new thread
Thanks!!
Aleks
#125
MBWorld Fanatic!
Join Date: Feb 2004
Location: Southern, CA.
Posts: 9,155
Likes: 0
Received 18 Likes
on
17 Posts
V12-Biturbo
I've been a fan & been to many E-Coast tracks as a kid w/my grandparents (he got me into the whole scene, I've also frequented many West coast tracks as a fan, but again the closest to my home in SB is a 4+ hr 1 way deal in fair traffic so an 8hr ordeal (not my idea of fun)
I'll gladly frequent any 1/4 mi if it was closer say 2- hrs 1 way but LA raceway (only trk that was in my backyard) has been closed for yrs & was only an 1/8 th mile. Still doesn't change the fact I'm a fan thru & thru & have ran 1/4
As for your pathetic excuses for high DA & poor track prep accounting for your 119 trap speed, talk about excuses lol, if you have poor traction it actually can net a higher trap, your 55 is inordinately slow for the mods you list period..
Last edited by Thericker; 04-28-2012 at 01:40 PM.