berti_00

Hey Guys out of no where this started happening... well i was actually cleaning my interior today and i noticed my door panel was not completely in i noticed by looking from the top right next to were the window rolls up there is the slot were the panel slides in... anyways long story short i managed to put it to were it should be and next thing you know my door handle is STUCK...

on the video i am showing the first time how its stuck and comparing it to how it should be with the rear door.... and the second time i brought my key next to me to show how the door handle works by clicking the inside of it and it just pops it out... so it locks/unlocks fine but something inside looks like its on its way or something for not letting me open it normally....

ideas and thoughts would be appreciated

thanks

here is the Video

http://www.youtube.com/watch?v=zwWoT...ature=youtu.be

loungn14

pull the handle and see if the tab is not set correctly. You will see a metal bracket that the handle has to go under

see the door handle replacement thread I did

berti_00

i will do that but do i have to remove my door panel? or just pull the door handle from doing the same way you did?

loungn14

just the handle...

berti_00

okay i'll report back tomorrow