**Fabtech-Performance**Product Release and Updates **Official Thread**
07-21-2012, 04:34 PM
#101
Former Vendor of MBWorld
Thread Starter
UPDATE!!!! FOLLOW US IN THE NEW SUB-FORUM WE HAVE BEEN WORKING WITH SITE ADMIN ON TO MAKE IT EASER FOR EVERYONE TO VIEW PRODUCTS AND UPDATES WITHOUT HAVING TO SCROLL ALL AROUND THE FORUM!! 
Last edited by FT-Performance; 07-22-2012 at 05:56 PM.
07-24-2012, 01:10 AM
#102
Former Vendor of MBWorld
Thread Starter
Our Superior service does not just stop at the time of sale, It carries into professional shipping solutions as well.
Last edited by FT-Performance; 07-24-2012 at 01:33 AM.
07-24-2012, 06:40 PM
#106
Former Vendor of MBWorld
Thread Starter
07-27-2012, 12:12 AM
#111
Former Vendor of MBWorld
Thread Starter
07-31-2012, 01:45 AM
#112
Former Vendor of MBWorld
Thread Starter
08-04-2012, 12:48 PM
#114
Former Vendor of MBWorld
Thread Starter
UPDATE FOR THE G/B MEMBERS ON I/C TANKS:
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
08-06-2012, 11:34 AM
#116
Former Vendor of MBWorld
Thread Starter
08-27-2012, 03:26 AM
#125
Former Vendor of MBWorld
Thread Starter
Working buddy! there in the works
WIDE DRLS for OEM fitment are still not available and the templates that are revised are being tested this week for those who bought them for OEM fitment that had issues.
