**FT-P**Group Buy Time Engine Bay I/C Tanks**
Thread Starter
Former Vendor of MBWorld
Joined: May 2012
Posts: 623
Likes: 0
From: OHIO
FTP-E55///AMG
UPDATE:
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
Last edited by FT-Performance; Aug 4, 2012 at 12:46 PM.
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,879
Likes: 22
From: Orange County, CA.
one car at a time
UPDATE:
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
So does this mean they will be shipping [as ordered] around 8/17 ???
Last edited by cij911; Aug 4, 2012 at 06:50 PM.
Thread Starter
Former Vendor of MBWorld
Joined: May 2012
Posts: 623
Likes: 0
From: OHIO
FTP-E55///AMG
We added an option. We didn't Change anything 
So here are the options:
1) We will ship your tanks on sch and ship you the valves when thy come in which can be T'd into the line very easily after install. (If the valve is not in on time)
2) You go with the optional cnc'd cabin filter flange that requires no trimming like the standard option, which can also be installed after the tank is installed so no delay on getting your item. (If you can go without a filter for a week or so you will get this instead at NO additional charge from what you paid in the beginning. Sounds like a good option to us
So here are the options:
1) We will ship your tanks on sch and ship you the valves when thy come in which can be T'd into the line very easily after install. (If the valve is not in on time)
2) You go with the optional cnc'd cabin filter flange that requires no trimming like the standard option, which can also be installed after the tank is installed so no delay on getting your item
. (If you can go without a filter for a week or so you will get this instead at NO additional charge from what you paid in the beginning. Sounds like a good option to us
MBWorld Fanatic!
Joined: Oct 2009
Posts: 2,825
Likes: 17
From: Southern California
E55 w/ goods, Z32 Project underway
UPDATE:
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
We have ran into a small delay with our vendor on the special drain valve (Which is only needed if your icing down at the track.
So here are the options:
1) We will ship your tanks on sch and ship you the valves which can be T'd into the line very easily after install.
2. We can hold your tank and ship when the valves get in as a whole. ETA End of Next week. 8/10
We have also Decided to give an option for the cabin filters. (Guys that purchased Filters)
Option 1: Our current Cabin filter utilizes the Stock plastic mounting box with our mesh and filter element. some of the plastic does need Trimmed on the OEM plastic bracket for the tank to fit perfect. If you decide to keep this option We will refund $40 of your $50 dollars back, and ship your tank with our mesh and Filter element.
Option 2: We have decided to have a custom Laser cut flange to take place of the OEM plastic filter mount, that will come coupled with our Mesh and Filter Element. They are being cut as we speak and should be done 8/10. If you want this option we will extend it to you at no charge (G/B members only) This option will let you go completely back to stock if needed without having to trim the plastic bracket and just Remove and Replace.
WE GREATLY appreciate all your thoughts, input and patience and its because of that you help us with new and innovative changes with some of our existing products, to better them before they hit the market. This G/B was offered because of you guys asking for it, so we want everything to be as best as we can get it for you guys.
Please PM us which option you would like before we start shipping This week
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,879
Likes: 22
From: Orange County, CA.
one car at a time
We added an option. We didn't Change anything
So here are the options:
1) We will ship your tanks on sch and ship you the valves when thy come in which can be T'd into the line very easily after install. (If the valve is not in on time)
2) You go with the optional cnc'd cabin filter flange that requires no trimming like the standard option, which can also be installed after the tank is installed so no delay on getting your item. (If you can go without a filter for a week or so you will get this instead at NO additional charge from what you paid in the beginning. Sounds like a good option to us
So here are the options:
1) We will ship your tanks on sch and ship you the valves when thy come in which can be T'd into the line very easily after install. (If the valve is not in on time)
2) You go with the optional cnc'd cabin filter flange that requires no trimming like the standard option, which can also be installed after the tank is installed so no delay on getting your item
. (If you can go without a filter for a week or so you will get this instead at NO additional charge from what you paid in the beginning. Sounds like a good option to us
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Sep 2002
Posts: 1,719
Likes: 12
From: West
2005 E55 Wagon
Just making sure, but the size of this bay tank has not changed? Its the same size and dimensions per the pic in this thread and will hold a little over 2 Gallons PLUS Line fluid?
MBWorld Fanatic!
Joined: Sep 2002
Posts: 1,719
Likes: 12
From: West
2005 E55 Wagon
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,879
Likes: 22
From: Orange County, CA.
one car at a time
)....Usually it is a near perfect 75 degrees...
MBWorld Fanatic!
Joined: Sep 2002
Posts: 1,719
Likes: 12
From: West
2005 E55 Wagon
Thread Starter
Former Vendor of MBWorld
Joined: May 2012
Posts: 623
Likes: 0
From: OHIO
FTP-E55///AMG
Thread Starter
Former Vendor of MBWorld
Joined: May 2012
Posts: 623
Likes: 0
From: OHIO
FTP-E55///AMG
Your eyes are deceiving you.
We shall see, Without Further adieu!! (Since I'am EXTREMELY impatient) 
. cij are you running the killer chiller?
MBWorld Fanatic!
Joined: Oct 2009
Posts: 2,825
Likes: 17
From: Southern California
E55 w/ goods, Z32 Project underway
DAMN! I though I was a critical suspicious person.
Yep, think he made two smaller tanks and trying to sneek them in. LOL. Laughing at this thread now. Ummm, ship me the front 'larger' one please.
Yep, think he made two smaller tanks and trying to sneek them in. LOL. Laughing at this thread now. Ummm, ship me the front 'larger' one please.
