accurate data logging...
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,879
Likes: 22
From: Orange County, CA.
one car at a time
But why not just get the Innovate or Zeitronix units (since you really need to have a wideband to monitor your AFRs) ???
The Innovate OT2 costs ~$180 and if in the future you decide to man up and install a wideband, you can do so with a very good system (LC-1)....
The Innovate OT2 costs ~$180 and if in the future you decide to man up and install a wideband, you can do so with a very good system (LC-1)....
Thread Starter
MBWorld Fanatic!
Joined: Dec 2011
Posts: 4,066
Likes: 37
From: Folsom, CA
2005 E55 AMG
http://www.palmerperformance.com/sto...9vgeo221v1lkr7
Super Member
Joined: Jan 2012
Posts: 526
Likes: 4
From: ChiTown
e46 m3, w211 e55
I bought a cheapo one off ebay to use bluetooth OBDII to iphone/ipad works OK, but i feel like it lags a bit.
Could try something like this for iOS guys....
http://www.ebay.com/itm/ELM327-WIFI-...675726&vxp=mtr
Could try something like this for iOS guys....
http://www.ebay.com/itm/ELM327-WIFI-...675726&vxp=mtr
Junior Member
Joined: May 2012
Posts: 23
Likes: 1
E55 AMG
Sorry for bringing an old thread back.
I do have ScanXL Pro with ELM327.
Could you gives give me hint on how to setup it to read right Boost values and I do need knock (detonation) degrees and counts.
I have to setup some PIDs manually? or how should I do it? thanks.
I do have ScanXL Pro with ELM327.
Could you gives give me hint on how to setup it to read right Boost values and I do need knock (detonation) degrees and counts.
I have to setup some PIDs manually? or how should I do it? thanks.
