Resetting Vehicle Height In Raised Mode
#1
MBWorld Fanatic!
Thread Starter
Join Date: Dec 2006
Location: Florida-Germany-New York
Posts: 1,123
Likes: 0
Received 30 Likes
on
25 Posts
2004 E55,1969 300SEL6.3,2011 ML350 BlueTec Diesel,2005 ML400 CDI
Resetting Vehicle Height In Raised Mode
I have the car perfectly balanced and the geometry is exactly as I want it. Now the question is: If I reset the vehicle height with STAR while in the raised position, will that change the setting to the normal setting of the ride height when the normal position is selected? In other words, I don't want to foul up the the normal setting.
I do know this for a fact; after I reset the ride height in the normal mode, the raised height was a bit lower than before and I note that now when I select Sport 2 than the car stays at the new lowered ride height.
My guess is that if I make a change to the raised height setting, it will affect the normal setting.
The reason I ask is because my driveway entrance is quite a steep drop from the street and I get a bit of contact going in and out.
Any thoughts on this?
I do know this for a fact; after I reset the ride height in the normal mode, the raised height was a bit lower than before and I note that now when I select Sport 2 than the car stays at the new lowered ride height.
My guess is that if I make a change to the raised height setting, it will affect the normal setting.
The reason I ask is because my driveway entrance is quite a steep drop from the street and I get a bit of contact going in and out.
Any thoughts on this?