My build is up and running!!
02-05-2013, 06:11 PM
#78
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
-8AN feed line with rail inlet opened up to the same size. -8AN end's and the fuel pressure port welded on the back and out of the way.
Decided to do my inlet and TB my own way like i usually seem to do. Something a little different than i've seen before. Just needs to be opened up and the inside finished. Should be right at 95.5mm opening.
Decided to do my inlet and TB my own way like i usually seem to do. Something a little different than i've seen before. Just needs to be opened up and the inside finished. Should be right at 95.5mm opening.
Last edited by e55amgrocket; 02-05-2013 at 06:25 PM.
02-05-2013, 06:18 PM
#80
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
but i'd love to drive you car again 
Driving your car last time got me in gear again to get my build back on track. I'll let you try my truck out to lol. Just got 118lbs of nitrous filled today so lets have some fun 
02-05-2013, 07:13 PM
#82
MBWorld Fanatic!
03-20-2013, 09:42 PM
#87
MBWorld Fanatic!
Looking good Steve, I'll have some pics for you tonight so you can add to your parts
What ever happened to the group purchase for rods?
What ever happened to the group purchase for rods?
03-20-2013, 09:48 PM
#88
MBWorld Fanatic!
Thread Starter
Join Date: Aug 2010
Location: Northern Va
Posts: 2,156
Likes: 0
Received 6 Likes
on
3 Posts
Dirt Scooters
They wanted me to make sure everything was perfect fitment wise with the rods before they made another 40 rods. Rod bolts are way bigger than stock too
03-20-2013, 09:53 PM
#89
MBWorld Fanatic!
