MIR track rental 3/8/13
#27
MBWorld Fanatic!
#30
Out Of Control!!
Thread Starter
Nice ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Hopefully you can make it
Haha can't wait to see the Florida beasts run!
Nice!!!! Weistec in the house
Now you gotta do it!!!
Time to unleash the fury bro!!
Unfortunately Jerry will be out of town
The more the merrier!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Hopefully you can make it
Nice!!!! Weistec in the house
Time to unleash the fury bro!!
The more the merrier!
#32
MBWorld Fanatic!
#33
Super Member
sold it...actually too nice of a car and wanted something more track worthy. I loved the 65 but always some $3k issue like coil packs, suspension issue, etc. Camaro has been great and it loves the track. I have had a lot of fun with it so far. See you at the track!
#34
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Not too much.
2.5 upper (purchased)
New Era CAI (purchased)
CORSA (purchased)
HE (purchased)
Thermostat (purchased)
Colder Plugs (purchased)
Light Cam (purchased)
Catch can (purchased)
Trying to avoid a lower pulley but many are trying to talk me into it.
2.5 upper (purchased)
New Era CAI (purchased)
CORSA (purchased)
HE (purchased)
Thermostat (purchased)
Colder Plugs (purchased)
Light Cam (purchased)
Catch can (purchased)
Trying to avoid a lower pulley but many are trying to talk me into it.
#35
MBWorld Fanatic!
![nix](https://mbworld.org/forums/images/smilies/nixweiss.gif)
#38
Super Member
good parts list. that is a high ten recipe with that cam. you may have to swap injectors.
#40
MBWorld Fanatic!
#42
Super Member
#43
MBWorld Fanatic!
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Last edited by chawkins2001; 01-18-2013 at 09:06 AM.
#44
MBWorld Fanatic!
I went the lower pulley route because I thought there might me some belt slip issues going with the smaller upper. So I had a 9.55" crank, KPE CAI, Kooks HFC headers, wait4me aux HE, 180 T-stat, colder plugs and wait4me ECM/TCM tune. I never did a run at the track with all those mods (with an 8.6" lower it ran 11.7 @ 122+), I did do a 7.71s 60-130mph time with all the mods.
Are you also running drag radials?
#45
MBWorld Fanatic!
#46
MBWorld Fanatic!
Join Date: Oct 2006
Location: merryland
Posts: 1,603
Likes: 0
Received 0 Likes
on
0 Posts
cornfed gtr and m3
Looking forward to another track event! ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Marcus, what cam are you running? I went 10.99 last year in mine with 8.6 lower and 2.55 upper, kooks headers, stock exhaust, New era intake, injectors, colder plugs and tune.
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
Marcus, what cam are you running? I went 10.99 last year in mine with 8.6 lower and 2.55 upper, kooks headers, stock exhaust, New era intake, injectors, colder plugs and tune.
#47
MBWorld Fanatic!
My Sentra Spec-V will be there in full force!
So you are not running your car or SUV... and just here to run your mouth?
![Stick Out Tongue](https://mbworld.org/forums/images/smilies/tongue.gif)
#48
MBWorld Fanatic!
Join Date: Dec 2008
Posts: 7,226
Likes: 0
Received 6 Likes
on
5 Posts
3-five-five/ TUNDRA/ 07 997 cab
Nice!
I went the lower pulley route because I thought there might me some belt slip issues going with the smaller upper. So I had a 9.55" crank, KPE CAI, Kooks HFC headers, wait4me aux HE, 180 T-stat, colder plugs and wait4me ECM/TCM tune. I never did a run at the track with all those mods (with an 8.6" lower it ran 11.7 @ 122+), I did do a 7.71s 60-130mph time with all the mods.
Are you also running drag radials?
I went the lower pulley route because I thought there might me some belt slip issues going with the smaller upper. So I had a 9.55" crank, KPE CAI, Kooks HFC headers, wait4me aux HE, 180 T-stat, colder plugs and wait4me ECM/TCM tune. I never did a run at the track with all those mods (with an 8.6" lower it ran 11.7 @ 122+), I did do a 7.71s 60-130mph time with all the mods.
Are you also running drag radials?
Im sick in the head
Yea, I hear ya. Looking for the right shop. There are a few close but looks like I may go with Cincy Speed. It is a Brian Tooley Racing Stage 1. I dont want to agressive. Trying to hide all the shiat from the wife. She will notice a pronounced lope.
#50
MBWorld Fanatic!
Join Date: Aug 2005
Location: North Jersey
Posts: 2,207
Likes: 0
Received 2 Likes
on
2 Posts
2012 CTS-V
I have the following planned fpr my V.
Stage 1
2.5 upper w/idler
Solid isolator
Airaid(installed)
Fluidyne HE
Plugs
Thermostat
Stage 2
8.6 lower
Injectors(ID850)
ZR1 cam