+-+-+-Official AEROFORCE TECHNOLOGY GAUGE Release+-+-+
#26
MBWorld Fanatic!
Join Date: Dec 2011
Location: new ringgold pa
Posts: 1,482
Likes: 0
Received 25 Likes
on
24 Posts
99 ford lightning
Aeroforce is great todd answers his phone and emails etc. Thats a difference between a real car guy vs somone only out for a buck. I have i guess the first one for the E55 other then his and still he waited to ship it since he was double checking everything on the testing end.
#30
MBWorld Fanatic!
#31
MBWorld Fanatic!
#32
Former Vendor of MBWorld
iTrader: (1)
Join Date: May 2008
Location: Houston
Posts: 12,139
Received 293 Likes
on
242 Posts
2003 W211 E55, 2003 W220 S600
if you all have different mounting ideas let me know and I can probably have something made. members wanted gauge pods so we made those. keep the new ideas coming and I will try my best to make them a reality.
#34
MBWorld Fanatic!
#37
Former Vendor of MBWorld
Thread Starter
Join Date: Jun 2012
Location: Atlanta, GA
Posts: 1,444
Likes: 0
Received 2 Likes
on
2 Posts
E55 AMG on Ethanol-Meth; 600rwhp BMW M5
Just wanted to mention some things that you guys may ask about:
1. Both the trans and ecm gauge should be connected to switched 12v power using the included 3 wire harnesses. They will not turn on/off properly using OBD2 power due to the way the ISO protocol works.
2. The gauges may or may not come with the red 2 pin jumper on the back of the gauge. The instructions say to remove it, some may not and the gauge will not turn on properly. Remember to remove the jumper.
3. The user manual for this gauge is V5.2 found on our website here:
http://aeroforcetech.com/files/Interceptor_USER_MANUAL_rev_5_2.pdf [1]
It's pretty simple to install and use.
1. Both the trans and ecm gauge should be connected to switched 12v power using the included 3 wire harnesses. They will not turn on/off properly using OBD2 power due to the way the ISO protocol works.
2. The gauges may or may not come with the red 2 pin jumper on the back of the gauge. The instructions say to remove it, some may not and the gauge will not turn on properly. Remember to remove the jumper.
3. The user manual for this gauge is V5.2 found on our website here:
http://aeroforcetech.com/files/Interceptor_USER_MANUAL_rev_5_2.pdf [1]
It's pretty simple to install and use.
#38
MBWorld Fanatic!
Craig - For those of us that already have an OBD2 datalogger and wideband, but are interested in logging transmission data, how would we connect the AF gauge ? (The transmission data is coming through the OBD2 port, correct ? So we would need an OBD2 splitter ?)
#39
Junior Member
Join Date: Aug 2008
Location: avon, ohio
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
'05 E55, '06 300c SRT8
Todd
#40
MBWorld Fanatic!
Yes sir, you would use a splitter cable so you only have to buy the Tcm module.
#44
Super Member
Got my gauges last week, gonna wire them up today.
Thinking of using these decals I just made. Hope my tuner doesn't mind
Thinking of using these decals I just made. Hope my tuner doesn't mind
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)