new supercharger clutch slipping wtf
#28
Super Member
Join Date: Mar 2011
Location: Porter Ranch, CA
Posts: 502
Likes: 0
Received 0 Likes
on
0 Posts
E55, CTS-V Wagon, Duc 1098R
No, mm. It should be .35-.45mm or 0.014" to 0.018". It won't function at 0.060" so I think you might be measuring the wrong thing. The clutch will bend too when you put the feeler gauges in so you need to be careful of that too. Measure between the magnet surface and the clutch surface and the feeler gauge needs to be in deep enough so that it matches the backing plate on the clutch so about 1/2 an inch from the edge. The outside edge of the clutch isn't going to be accurate.
#29
MBWorld Fanatic!
Thread Starter
No, mm. It should be .35-.45mm or 0.014" to 0.018". It won't function at 0.060" so I think you might be measuring the wrong thing. The clutch will bend too when you put the feeler gauges in so you need to be careful of that too. Measure between the magnet surface and the clutch surface and the feeler gauge needs to be in deep enough so that it matches the backing plate on the clutch so about 1/2 an inch from the edge. The outside edge of the clutch isn't going to be accurate.
#31
MBWorld Fanatic!
Thread Starter
OK re checked and I'm right around .045 I can fit a .17in stick but not an 18 so right about 17.5 so about .045mm
Anyone know the tightest belt that will clear a 178 pulley? I'm going to swap belts to see what happens
Anyone know the tightest belt that will clear a 178 pulley? I'm going to swap belts to see what happens
#34
MBWorld Fanatic!
Thread Starter
Its on my todo list guys,I have some much going on right now.Im still waiting for a full e63 body kit to come in also.
Took it out for a spin and I cant get any traction whatsoever I get tc blinking all threw second and its like 83 out today
Took it out for a spin and I cant get any traction whatsoever I get tc blinking all threw second and its like 83 out today