Guys with AFtermarket wheels + aggressive offsets Please COME IN !
#27
MBWorld Fanatic!
what about a 19x8.5 +20 on the front and 19x9.5 +25 on the rear?
how flush would that be? still able to run 245 front 275 or 285 in the rear
how flush would that be? still able to run 245 front 275 or 285 in the rear
#28
Junior Member
9.5 +25 isn't that aggressive if you think some people are running 10.5 +35. You would probably want to run the 275 to be safe.
I know some poeple run 9.5 +28 CLS wheels in back. 3mm wont be too much further out.
P.S. I'm a former VW stance kid. so I only kinda know what im talking about
I know some poeple run 9.5 +28 CLS wheels in back. 3mm wont be too much further out.
P.S. I'm a former VW stance kid. so I only kinda know what im talking about
#29
MBWorld Fanatic!
9.5 +25 isn't that aggressive if you think some people are running 10.5 +35. You would probably want to run the 275 to be safe.
I know some poeple run 9.5 +28 CLS wheels in back. 3mm wont be too much further out.
P.S. I'm a former VW stance kid. so I only kinda know what im talking about
I know some poeple run 9.5 +28 CLS wheels in back. 3mm wont be too much further out.
P.S. I'm a former VW stance kid. so I only kinda know what im talking about
#30
Junior Member
whats the width of the +20? 8.5 right?
Im running 19x8.5 +28 up front and i MAYBE put a 3mm spacer up front. So I doubt it would fit, unless you know a great fender roller(if you're in Houston i can do it)
If you can measure the thickness at the lug holes you may be able to get the back face plate shaved down a few mm to up the offset, I've seen a lot of guys do that in the VW/Audi stance scene.
Im running 19x8.5 +28 up front and i MAYBE put a 3mm spacer up front. So I doubt it would fit, unless you know a great fender roller(if you're in Houston i can do it)
If you can measure the thickness at the lug holes you may be able to get the back face plate shaved down a few mm to up the offset, I've seen a lot of guys do that in the VW/Audi stance scene.
Last edited by Pjnash; 10-02-2013 at 03:10 PM.