Upgraded He + pump installed - Pic
05-16-2013, 09:49 PM
#1
Member
Thread Starter
Join Date: Sep 2008
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
A box
Upgraded He + pump installed - Pic
Had some free Time today decided to install my FTP H/e and the 010 Pump.
*** Just to Make this clear - I was reading through ALOT before doing this, I wanted to Do a KEY-ON IC pump Mod, ALOT of people were saying that these pumps turn on AUTOMATICALLY bla bla... THEY DONT ! ***
Anyways, I cut both wires going to the IC Pump, Grounded 1 and the power to a Key-on power, Bleed the system, works GREAT. I like the Mean FRONT MOUNT look without the Grill, Just need a CF front lip and the Front end is set =D
*** Just to Make this clear - I was reading through ALOT before doing this, I wanted to Do a KEY-ON IC pump Mod, ALOT of people were saying that these pumps turn on AUTOMATICALLY bla bla... THEY DONT ! ***
Anyways, I cut both wires going to the IC Pump, Grounded 1 and the power to a Key-on power, Bleed the system, works GREAT. I like the Mean FRONT MOUNT look without the Grill, Just need a CF front lip and the Front end is set =D
05-17-2013, 01:08 AM
#2
MBWorld Fanatic!
I hate the push the lower bumper gets with the FTP H/E. I can't wait to go Suvneer front. With my carbon lip, the gap between the bumper and hood has grown.
On a side note, how did you mount your oil cooler?
On a side note, how did you mount your oil cooler?
05-17-2013, 01:19 AM
#3
Super Member
front looks great
any thoughts on spraying AMG on the H/E
got my 010 installed this past weekend
, waiting on new H/E and dads trunk tank they should ship next week
. Gary will also be shipping my lip as soon as he gets his shipment.
any thoughts on spraying AMG on the H/Egot my 010 installed this past weekend, waiting on new H/E and dads trunk tank they should ship next week. Gary will also be shipping my lip as soon as he gets his shipment.
05-17-2013, 08:44 AM
#7
Member
Thread Starter
Join Date: Sep 2008
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
A box
Oil cooler is still in its stock location, no need to change/remove, wasnt in the way at all.
Trending Topics
05-18-2013, 11:30 AM
#9
Member
Thread Starter
Join Date: Sep 2008
Posts: 170
Likes: 0
Received 0 Likes
on
0 Posts
A box
Oh you mean the Trans lines ? well those are just lines, i dont believe they do any type of real cooling other then what a extended line would net, im not blocking the transcooler at all, so i left them in place.
