Final word on SC Pulley Torque Spec
#1
Junior Member
Thread Starter
Join Date: Jun 2015
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
E55, Mazda CX9
Final word on SC Pulley Torque Spec
Seeing conflicting information from two good sources.
MB USA 60nm
Eurocharged suggest 20nm
Big difference, can someone confirm, assume this would effect the gap?
We gapped it to 0.30mm @ 20nm and ran it, heated up and the gap expanded so had to add shims.
Thanks
MB USA 60nm
Eurocharged suggest 20nm
Big difference, can someone confirm, assume this would effect the gap?
We gapped it to 0.30mm @ 20nm and ran it, heated up and the gap expanded so had to add shims.
Thanks