4000lb Sideways
#602
Super Member
Thread Starter
#603
MBWorld Fanatic!
Join Date: Jan 2010
Location: Richmond, CA
Posts: 3,249
Received 256 Likes
on
233 Posts
2001 E320 Wagon, 2006 LBZ Silverado, 2007 E63 (sold), 2001 E55 (sold)
Who gives a **** if it's not the right thing to do financially. Lifted 4x4 vans are the coolest **** there is when it comes to trucks.
#604
Super Member
Thread Starter
Not quite sure what yet, but it feels good to have a little bit of capital.
#605
Senior Member
#606
Senior Member
How about saving up for investing in CANNABIS?! Made a TON already.....
#607
MBWorld Fanatic!
I like the new drift project. It has a lot in common with my W208 CLK project at StumptownBenz: https://stumptownbenz.com/stumptown-benz-is-born/
Maybe our cars were siblings? :-)
Maybe our cars were siblings? :-)
#608
Super Member
Thread Starter
I like the new drift project. It has a lot in common with my W208 CLK project at StumptownBenz: https://stumptownbenz.com/stumptown-benz-is-born/
Maybe our cars were siblings? :-)
Maybe our cars were siblings? :-)
#609
Super Member
Thread Starter
Copying my signature here because it's going to be changing:
83mm pulley, Eurocharged ECU+TCU tunes + gear hold
Momo MOD 7 w/ billet hub adapter, shift buttons
2.0L FMHE + 010 pump + 2 × 1350 CFM fans, r2
Wavetrac 2.65 HAG215 housing differential, r2
ECE engine & transmission mounts, r1.1
Xtrons headunit + Scantool LX + Torque
2 channel hydraulic rear brake, r1.2
Four corner universal flares, r2
TSW Chrono Bronze 18x9.5
Track: +1.5"F +3.5"R, r1.1
KW Variant 2 Coilovers
83mm pulley, Eurocharged ECU+TCU tunes + gear hold
Momo MOD 7 w/ billet hub adapter, shift buttons
2.0L FMHE + 010 pump + 2 × 1350 CFM fans, r2
Wavetrac 2.65 HAG215 housing differential, r2
ECE engine & transmission mounts, r1.1
Xtrons headunit + Scantool LX + Torque
2 channel hydraulic rear brake, r1.2
Four corner universal flares, r2
TSW Chrono Bronze 18x9.5
Track: +1.5"F +3.5"R, r1.1
KW Variant 2 Coilovers
The following users liked this post:
mondo (06-05-2019)
#612
Super Member
Thread Starter
Went off at Gingerman Raceway in corner 10b and slid sideways.
The mowed grass packed into the rim and touched on the enormous hot brakes, within about 30 seconds it started smoking and eventually we saw a visible flame come over the top of the fender.
The mowed grass packed into the rim and touched on the enormous hot brakes, within about 30 seconds it started smoking and eventually we saw a visible flame come over the top of the fender.
#615
Super Member
Thread Starter
#616
Junior Member
Wow, just wow... Took me two days to get through all 25 Pages but man was it an awesome read... I really enjoyed the build, thanks for sharing... your videos are Epic... Respect to you sir..
#618
Super Member
Thread Starter
I have some excellent news I'll be able to share soon about my next project.
As for this build, it was at Gridlife Mid-West and now it's going to Gridlife South!
Seriously, go meet the team and check out the build.
#620
Super Member
Thread Starter
Driven by our pro driver https://www.instagram.com/michaelhurczyn/ at Gridlife South ATL.
#624
Super Member
Thread Starter
Hiya,
I was never in LA to begin with. This car was completed in Oakland and shipped to CT. I drove it at the Gridlife Mid-West (Gingerman) event and our professional driver, Michael Hurczyn, drove it at the Atlanta one.
I remain in Norther California where I am wrapping up Dapper Drive V2. The car is entering livery design stages currently and will represent FCP Euro at more events in the future
I was never in LA to begin with. This car was completed in Oakland and shipped to CT. I drove it at the Gridlife Mid-West (Gingerman) event and our professional driver, Michael Hurczyn, drove it at the Atlanta one.
I remain in Norther California where I am wrapping up Dapper Drive V2. The car is entering livery design stages currently and will represent FCP Euro at more events in the future