Help me spend my money
Remember it's going to be a daily not interested in too much power just maybe a tune on ecu maybe trans tune if its worth it.
This assumes that all maintenance is well up to date, drive pulleys are in excellent order and you have a voltage regulator, crank position sensor, fuel pump fuse, belts and a few other goodies sitting in a box in the garage waiting.
In other words..make sure the car is in tip top working order first...that $3k could go quickly just doing that
Check us out www.vrpspeed.com
Trending Topics
The Best of Mercedes & AMG
That's fake new kid.
Anyways I recommend going straight to a 77mm pulley, heat exhanger, IC pump, ECU tune. Once you start dabbling in the power mods you will, like the rest of us, probably end up wanting more and more.
I have a 68 SS Camaro that I can play with.
plm HE is the smallest aftermarket HE available. If you had asked we sell those for $315.
We also sell Eurocharged tunes and exhaust products, but a large percentage of our products we manufacture ourselves.
plm HE is the smallest aftermarket HE available. If you had asked we sell those for $315.
We also sell Eurocharged tunes and exhaust products, but a large percentage of our products we manufacture ourselves.
The PLM is much larger than stock. Yes there are larger ones available. No, not everyone likes cutting and drilling into their pride and joy to mash the largest exchanger possible in there. I would run one of your secondary exchangers before drilling holes in my bumper bar.
plm HE is the smallest aftermarket HE available. If you had asked we sell those for $315.
We also sell Eurocharged tunes and exhaust products, but a large percentage of our products we manufacture ourselves.










