Bosch 010 Bleeding Method HELP!
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 23
Likes: 0
2004 E55
Bosch 010 Bleeding Method HELP!
I swear I feel like I’ve read every DIY out there for this but after trying to debate with my mechanic whether or not it is necessary to bleed the system I’ve decided to take matters into my own hands... How in the hell are you supposed to put power to the pump?! Yes, I’ve seen and read the typical, “use alligator clips to a battery or jump pack”, but how/where do you connect them to? No way you can fit alligator clips inside the connector leads. I’ve bought some clear tubing from the hardware store now all I need to know is how to get power to it. Please Help!
Member
Joined: May 2013
Posts: 125
Likes: 7
From: Monmouth County, NJ
2005 E55
If you blip the throttle to wide open throttle it will force the pump on. It won't run for very long but it will run it. This works great at the track as well, go into neutral and blip it to wide open very quick and watch those temps come down right before a run!
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 23
Likes: 0
2004 E55
I’m referring to bleeding the air out of the cooling circuit after installing a new pump.
MBWorld Fanatic!
Joined: Jun 2014
Posts: 1,036
Likes: 169
From: Portland, Oregon
2019 Jeep Trackhawk, 2002 CLK55, 2014 911 Carrera
You can force the pump to turn itself on, with the car running, by stabbing the throttle to the floor all the way for a quick second. The computer knows you hit WOT and will turn on the intercooler pump, even if the car is just sitting. I used to do this in the staging lanes all the time and it worked great.
MBWorld Fanatic!
Joined: Jun 2014
Posts: 1,036
Likes: 169
From: Portland, Oregon
2019 Jeep Trackhawk, 2002 CLK55, 2014 911 Carrera
Dang, you beat me to it!
Member
Joined: May 2013
Posts: 125
Likes: 7
From: Monmouth County, NJ
2005 E55
Yes and what I said to do will force the pump to run. The car thinks you are about to rip it so it fires the pump on. Do this a few times until the system is bled, thats exactly how I did it myself.
Member
Joined: May 2013
Posts: 125
Likes: 7
From: Monmouth County, NJ
2005 E55
Trending Topics
MB World Stories
The Best of Mercedes & AMG
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
MBWorld Fanatic!
Joined: Jun 2014
Posts: 1,036
Likes: 169
From: Portland, Oregon
2019 Jeep Trackhawk, 2002 CLK55, 2014 911 Carrera
???
We are telling you the easiest way to get the pump to turn on so you can bleed it. It just requires the car to be running. You don't need to use any jumper wires or anything, just start the car, let it warm up, then stab the throttle to the floor for a split second. Your pump will turn on and you can bleed the system.
We are telling you the easiest way to get the pump to turn on so you can bleed it. It just requires the car to be running. You don't need to use any jumper wires or anything, just start the car, let it warm up, then stab the throttle to the floor for a split second. Your pump will turn on and you can bleed the system.
MBWorld Fanatic!
Joined: Jan 2014
Posts: 3,969
Likes: 1,317
From: Republic of Texas
'99 and '05 E55 AMG
Just activate the pump in STAR while crimping the line next to the bleed port.
EDIT: Control Units/Drive/ME/Actuations/M44(charge air cooler circulation pump)
EDIT: Control Units/Drive/ME/Actuations/M44(charge air cooler circulation pump)
Last edited by bbirdwell; Jul 16, 2018 at 03:39 PM.
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 23
Likes: 0
2004 E55
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 23
Likes: 0
2004 E55
???
We are telling you the easiest way to get the pump to turn on so you can bleed it. It just requires the car to be running. You don't need to use any jumper wires or anything, just start the car, let it warm up, then stab the throttle to the floor for a split second. Your pump will turn on and you can bleed the system.
We are telling you the easiest way to get the pump to turn on so you can bleed it. It just requires the car to be running. You don't need to use any jumper wires or anything, just start the car, let it warm up, then stab the throttle to the floor for a split second. Your pump will turn on and you can bleed the system.
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 23
Likes: 0
2004 E55
Well this is what I originally thought but every DIY is so adamant about bleeding it manually. The system has not been split and is in factory stock form.
MBWorld Fanatic!
Joined: Jun 2014
Posts: 1,036
Likes: 169
From: Portland, Oregon
2019 Jeep Trackhawk, 2002 CLK55, 2014 911 Carrera
I normally avoid doing that, even though the reservoir is designed to direct the spray downward instead of up into your face like the old days. I would take off the cap when the car is relatively cool, then route your bleed line over to it and follow the directions above to get the pump running.
Member
Joined: Jan 2017
Posts: 166
Likes: 20
From: East Coast
2005 E55 AMG
Open your hood and look at your supercharger. Look slightly to the left of it, and you'll see two metal lines coming out from underneath. Those are the intercooler lines. You'll see one line has a nipple on it that is capped off before the hard line goes to rubber. With the car off, remove the nipple and run an appropriately sized clear hose from the nipple to your coolant reservoir. Clamp down on the hose below the nipple with vice grips (put tape or something on the end as to avoid potentially damaging the hose). Now get into the car, turn it on, and floor it for a second. This will activate the pump, and the intercooler system will begin to bleed.
Senior Member
Joined: Apr 2015
Posts: 354
Likes: 32
04 E55 AMG
Then it will self bleed. No need to bleed it. Most of the DIY people here have split their systems. I changed mine out when I bought the car no issues and I never bled the system.
Member
Joined: May 2013
Posts: 125
Likes: 7
From: Monmouth County, NJ
2005 E55
I normally avoid doing that, even though the reservoir is designed to direct the spray downward instead of up into your face like the old days. I would take off the cap when the car is relatively cool, then route your bleed line over to it and follow the directions above to get the pump running.
Member
Joined: Jan 2017
Posts: 96
Likes: 30
2006 E55 AMG
MBWorld Fanatic!
Joined: Aug 2011
Posts: 3,428
Likes: 288
From: New Zealand
Read the link in my signature, doesn't get any easier than that. Unlike other AMG supercharger models, the E55 is not completely self bleeding and people do have temperature issues occasionally when not done correctly.
Last edited by tw2; Jul 16, 2018 at 06:48 PM.
