e55 trans trouble
#1
Junior Member
Thread Starter
e55 trans trouble
So, I just bought a 2001 E55 with 201k miles on it for $1,500 from our dealership. Because no one is sure what is wrong, we do alot of used. So I have had some slight experience with the 722.6. The car is stuck in limp mode, even after clearning the computers. I changed the fluid and the conductor plate and it still is not shifting. The code it has now is P0748 and its saying the Y3/6Y1 solenoid is is bad, but it passes when you do a solenoid test. Also I don't think this solinoid controls shifting. Next the Shifter indicator is messed up, wont say what gear you are in. am I correct in my assumtion that means I have to replace the center shjifter?
it did have the leaking conductor connector, that got cleaned up and replaced as, well.
it did have the leaking conductor connector, that got cleaned up and replaced as, well.
#2
Out Of Control!!
![](https://mbworld.org/forums/images/ranks/veteran_army.png)
It means that the shifter switch in the console is bad---the other issue is did you FU(brake or bend a pin) when you changed out the connector.
#3
Junior Member
Thread Starter
When I installed the connector, I used a boriscope during install to make sure I didnt bend anything.
is it a straight swap or do I need to program it?
is it a straight swap or do I need to program it?
Last edited by SeanDaugherty; 07-30-2018 at 05:28 PM.